The camcorder : basic recording, Votre caméscope : enregistrement simple, Inserting and ejecting a cassette – Samsung SC-D6550-XAC Manuel d'utilisation

Page 38: Insertion et éjection d’une cassette

Advertising
background image

ENGLISH

38

38

FRANÇAIS

The Camcorder : Basic Recording

Inserting and Ejecting a Cassette

✤ When inserting a tape or closing the cassette compartment, do not apply

excessive force, as it may cause a malfunction.

✤ Do not use any tape other than Mini DV cassettes.

1. Connect a power source and slide the TAPE

EJECT switch and open the cassette door.

The cassette holder automatically rises and
opens forward.

2. Insert a tape into the cassette compartment with

the tape window facing outward and the
protection tab toward the top. (Inserting a
Cassette)

Remove the cassette tape, which is
automatically ejected by pulling the cassette
out. (Ejecting a Cassette)

3. Press the area marked PUSH on the cassette

door until it clicks into place.

Be careful to keep the hand strap away from
the cassette door when closing it. Closing the cassette door with the
hand strap inside may cause damage to the unit.

The cassette is loaded automatically.

4. Close the cassette door.

[ Note ]
When you have recorded something that you wish to keep, you can protect it so
that it will not be accidentally erased.

a. Protecting a tape:

Push the safety tab on the cassette so that the
hole is uncovered.

b. Removing the tape protection:

If you no longer wish to keep the recording on
the cassette, push the safety tab back so that it
covers the hole.

How to store a tape
a. Avoid places with magnets or magnetic interference.
b. Avoid humidity and dust prone places.
c.

Keep the tape in an upright position and avoid storing it in direct sunlight.

d. Avoid dropping or knocking your tapes.

Votre caméscope : enregistrement simple

Insertion et éjection d’une cassette

✤ Ne forcez pas lorsque vous insérez une cassette ou fermez le compartiment

à cassette ; cela risquerait en effet d'entraîner un dysfonctionnement.

✤ Utilisez uniquement des cassettes MiniDV.

1. Raccordez votre appareil à une source

d’alimentation puis faites glisser le bouton
TAPE EJECT, puis ouvrez le volet du
compartiment à cassettes.

Le compartiment à cassettes se soulève et
s’ouvre automatiquement.

2. Insérez une cassette dans le compartiment, la

fenêtre de la cassette devant être orientée vers
l’extérieur et le volet de protection vers le haut.
(Insertion d’une cassette)

La cassette est automatiquement éjectée
dès que vous exercez une pression vers
l’extérieur. (Ejection d’une cassette)

3. Appuyez sur la zone du compartiment à

cassettes marquée PUSH jusqu’à ce que vous
entendiez un déclic.

Éloignez la dragonne du tiroir à cassette lorsque vous fermez celui-ci.
Vous risqueriez d’endommager l’appareil en coinçant la dragonne à
l’intérieur du compartiment à cassettes.

La cassette est chargée automatiquement.

4. Refermez le compartiment.

[ Remarque ]
Lorsque vous souhaitez garder une cassette que vous avez enregistrée, vous
pouvez la protéger de sorte qu'elle ne puisse être effacée par mégarde.

a. Protection d’une cassette :

Faites glisser la languette de protection vers la
position Save de façon à découvrir l’ouverture.

b. Retrait de la protection en écriture de la

cassette :
Lorsque vous ne voulez plus conserver un
enregistrement, repoussez le volet de
protection en écriture de la cassette afin
d’obturer l’ouverture.

Conditions de conservation des cassettes
a. Ne placez pas les bandes à proximité d’aimants ou d’interférences

magnétiques.

b. Évitez les endroits humides et poussiéreux.
c. Rangez-les en position verticale, à l’abri du soleil.
d. Ne faites pas tomber les bandes et ne les cognez pas.

1

2

4

3

PUSH

SAVE

a

REC

b

00875J SCD6550 US+FR~081 4/27/05 6:34 PM Page 38

Advertising
Ce manuel est liée aux produits suivants: