Alarm messages – Sony DSR-45/45P Manuel d'utilisation

Page 97

Advertising
background image

Chapter 7

Maintenance

97

(GB)

Chapter 7 Maintenance

If an error occurs, a warning appears on the LCD
monitor and the MONITOR VIDEO output (if the
CHARACTER DISPLAY (MONITOR OUT) switch is
set to ON). Check them with the following list.

LCD

monitor

Beep

Description/Recovery

%Z

DEW

DETECTED

Beep

Moisture condensation

t

Remove the cassette, then wait more than one hour

with the unit powered on.

Q

NO TAPE

Beep

You tried to record without a cassette.

t

Insert a cassette.

Q

No beep

The tape is reaching the end during recording.

t

Provide a new cassette.

QZ

TAPE END

Beep

The tape reached the end and still tried to record.

t

Rewind the tape or replace

the cassette with a new one.

QZ

REC

INHIBIT

Beep

The cassette is write-protected. (The REC/SAVE switch is set to SAVE.)

t

Set the

REC/SAVE switch to REC or use another cassette

(See page 30 (GB)).

REC MODE

NOT DVCAM

Beep

You tried to dub the sound onto a tape that is not DVCAM-formatted.

t

Use a

DVCAM-formatted tape on which the sound has been recorded in the 32 kHz
audio mode (4-channel/12 bits).

16BIT OR

NO REC TAPE

Beep

You tried to dub the sound onto a blank tape or onto a tape on which the sound
was not recorded in the 32 kHz audio mode (4-channel/12 bits).

t

Use a

DVCAM-formatted tape on which the sound has been recorded in the 32 kHz
audio mode (4-channel/12 bits).

DV IN

SELECTED

Beep

You tried to dub the sound when the INPUT SELECT selector has been set to
DV.

t

You cannot dub the sound in the DV input mode. Select another input

mode.

CLOCK SET

No beep

You did not set the clock when you turned on the unit.

t

Set the clock using the

menu

(See page 92 (GB)).

COPYRIGHT
PROTECTED

Beep

You tried to record a copyright protected source.

t

You cannot record a

copyright protected source

(See page 32 (GB)).

No beep

The video heads are clogged.

t

Clean the video heads with the supplied

cleaning cassette. (The unit can detect if the video heads are clean only before
recording. If the video heads get clogged during recording, the unit cannot detect
it.)

x

HEAD CLOG

Y

Displayed
alternately

CLEANING

CASSETTE

Z

Beep

The unit is running the self-diagnostics

(See page 100 (GB)).

Display

window

Err

Err

Err

Err

Err

Err

Err

Err

Err

— a)

Alarm Messages

a) A self-diagnostics code number (see page 100 (GB)) is displayed on the display window.

Advertising