Recording – Sony DSR-45/45P Manuel d'utilisation
Playback and Recording
Chapter 2 Playback and Recording
To video equipment without a DV jack
You can connect this unit to video equipment without
a DV jack. Use this unit as a recorder as follows.
Connect one of the following as a video cable: video
y 3BNC), S-video cable, or 75 Ω
Use a conversion cable for the audio connection,
depending on types of audio output connectors on the
player (see page on 23 (GB)).
• During recording, analog input signals can be output
simultaneously from the DV jack for backup. Set DV
EE OUT on the VTR SET menu to ON.
For details on the VTR SET menu, see “VTR SET menu”
on page 90 (GB).
• If you connect the output connectors of this unit to
the input connectors of the player, a humming noise
may be generated or the image may be distorted. If
these phenomena occur, set the INPUT SELECT
selector to a position where a signal is not currently
being input, or disconnect the cables.
Phono jack cable
S-video cable (not supplied)
coaxial cable (not supplied)
Audio cable (phono jack) (not supplied)
Video cable (3BNC
3BNC) (not supplied)
: Signal flow