Warnings about duplication – Sony DSR-45/45P Manuel d'utilisation
Duplication (generating a work tape with the same time code)
Chapter 5 Duplication and Audio Dubbing
Duplication and Audio Dubbing
Warnings about duplication
If an error occurs during duplication, a STOP/
CAUTION number and warning message will be
displayed on the LCD monitor and the MONITOR
VIDEO output screen. Except for STOP/CAUTION
No. 60 (RECORDER: SHORTER TAPE), “Err” is
displayed on the display window.
The following table lists these warnings and messages.
If a warning message is displayed, check this table and
take the appropriate action.
[DV IN] NOT SELECTED
The INPUT SELECT selector on the recorder (this unit) is not set to DV.
the INPUT SELECT selector to DV.
The DV cable is not connected correctly.
Connect the DV cable correctly.
There are multiple DV connections or the DV connection is looped.
cannot connect multiple devices. Connect only one player to this unit.
The DV cable has been unplugged and plugged in again.
Check the DV cable
connection. Try to duplicate again.
The player is in the recording mode.
There is no cassette in the player.
The player cannot be controlled, or the duplicate mode has been set to
and the source tape has reached the end of the tape.
The player rejects control.
The player is disabled or is in a different mode than the recorder (this unit) has
The source tape is not recorded in the DVCAM format.
You can only duplicate
a tape recorded in the DVCAM format.
The player has been manually operated or the player’s protection function
cancelled the playback pause mode when the duplicate mode was set to
TAPE INFO. UNKNOWN
The information on the cassette in the player cannot be read.
If the cassette
information is correct, clean the terminal on the cassette and insert the cassette
(see page 99 (GB)) .
The player could not read the cassette memory during duplication.
cassette memory is correct, insert the cassette again.
The player has detected self-diagnostics.
Refer to the instruction manual of
Moisture condensation has occurred in the player.
Refer to the instruction
manual of the player.
DVCAM NOT SELECTED
REC MODE on the VTR SET menu of the recorder (this unit) is set to DV SP.
Set REC MODE to DVCAM.
The cassette in the recorder (this unit) does not have cassette memory, but the
recorder tried to duplicate the cassette memory.
Insert a cassette with
The cassette memory data cannot be written in the cassette in the recorder (this
Clean the terminals on the cassette
(see page 99 (GB)).
The recorder (this unit) stopped while duplicating.