Sony DSR-45/45P Manuel d'utilisation

Page 13

Advertising
background image

Chapter 1

Overview

13

(GB)

Chapter 1 Overview

• In addition to the Remote Commander supplied with

the unit, the unit accepts signals from any Sony
Remote Commander whose command mode is set to
VTR4. When this switch is set to REMOTE, the
Remote Commander functions depending on the
setting of LOCAL ENBL on the REMOTE menu. If
you want to disable the control from any Remote
Commander, set COMMANDER on the OTHERS
menu to CONTROL S.

• The TIMER selector 4 setting has a higher priority

than this switch setting.

• When this switch is set to REMOTE, the ON/

STANDBY switch 3 does not work. To enable the
ON/STANDBY switch, set this switch to LOCAL or
set LOCAL ENBL on the REMOTE menu to ALL
KEYS.

3

ON/STANDBY switch and lamp

Press this switch to turn the unit on. The ON/
STANDBY lamp lights up in green. When you press
this switch again, the unit goes into the standby mode
and the lamp lights up in red.

Note

When the REMOTE/LOCAL switch is set to
REMOTE, this switch does not work. To enable this
switch, set the REMOTE/LOCAL switch to LOCAL
or set LOCAL ENBL on the REMOTE menu to ALL
KEYS.

4

TIMER selector

Use to select Auto Repeat or recording using an
external AC timer (not supplied).

REPEAT: Whenever the power is connected to this

unit, a tape rewinds to its beginning automatically
and playback starts. The unit repeats the playback
from the beginning to the first index (if there is no
index on the tape, to an unrecorded portion; if
there is no unrecorded portion, to the tape end).
Auto Repeat also functions if you set this selector
to REPEAT during playback or rewinding.

For details on Auto Repeat, see “Automatically playing
back a tape repeatedly (Auto Repeat)” on page 39 (GB).

OFF: Auto Repeat or timer recording is released.
REC: Recording begins the moment the power is

connected to the unit.

Note

This selector setting has a higher priority than the
REMOTE/LOCAL switch 2 setting.

5

AUDIO MONITOR selector

Use to select the audio track you want to listen to
through the PHONES jack 7 or MONITOR AUDIO
jack.

CH-1/2: channels 1/2 only
MIX: channels 1/2 and channels 3/4
CH-3/4: channels 3/4 only

6

PHONE LEVEL control knob

Controls the volume of the headphones connected to
the PHONES jack 7.

7

PHONES jack

Connect stereo headphones for monitoring sounds
during recording or playback. The audio signal you
want to monitor can be selected with the AUDIO
MONITOR selector 5.

8

RESET button

Press this button to initialize the time set on the
internal clock and the time code of the FREE RUN
setting. Use the tip of a ball-point pen or similar tool to
press this button. (The menu item settings are
maintained.)

9

CHARACTER DISPLAY (MONITOR OUT)

(data items superimposed on an external monitor)
switch
Set this switch to ON to superimpose data items on the
MONITOR VIDEO output. Even if you set it to OFF,
the tape label, title and data codes (camera data and
date/time recorded by a camera) are superimposed.

Note

To choose whether or not the tape label, title, or data
codes are displayed, use the menu items. Also, you can
select the data code items to be displayed by pressing
the DATA CODE button on the Remote Commander.

0

INPUT SELECT selector

You can select DV, S VIDEO, VIDEO, or
COMPONENT to input signals.
The type of signal selected is displayed on the Data
screen on the LCD monitor on the front panel.

Notes

• When you input signals to the DV jack, the following

settings are disabled:
– Setting of the audio input level control selector

(–10/–2/+4)

– Audio recording level

(Continued)

Advertising