Playback – Sony DSR-45/45P Manuel d'utilisation

Page 38

Advertising
background image

38

(GB)

Chapter 2

Playback and Recording

Chapter 2 Playback and Recording

Playback

A chronological list appears on the monitor screen.

The displayed forms of the date and time can be
changed by setting DATE DISP and TIME DISP on the
DISPLAY SET menu.
For the DSR-45P, “PROG” is displayed instead of
“CH.”
For details on the DISPLAY SET menu, see “DISPLAY
SET menu” on page 85 (GB).

2

Press the . or > button to select a scene.

The unit starts searching and when it locates the
scene, begins playback. During Photo search, the
unit turns to the playback pause mode.

To search without cassette memory

When you use a cassette without cassette memory, the
unit searches in the order of the actual positions of the
scenes, regardless of the setting of CM SEARCH on
the CM SET menu.
On a cassette with cassette memory, when you want to
perform searches with this procedure, set CM
SEARCH on the CM SET menu to OFF.

For details on the CM SET menu, see “CM SET menu” on
page 81 (GB).

Note

Title search is not available when searching a cassette
without cassette memory.

INDEX 00

SEARCH

When selecting INDEX SEARCH

1

Press the SEARCH SELECT button on the Remote
Commander or the SEARCH MODE button on the
Remote Control Unit (DSRM-20, not supplied) to
select the search type.

2

Press the . or > button repeatedly to locate
the scene you want.

Each time you press the . or > button, the
unit searches for the previous or next search point.
When a search point is located, its number is
indicated on the monitor screen.
The unit starts searching backwards or forwards
until the number comes to zero, then plays back the
scene. During Photo search, the unit turns to the
playback pause mode.

How signals are recorded

There are four different signal types, one for each
search method; index, title, date and photo signals.
They are recorded by the digital camcorder (DSR-200/
200P, 200A/200AP, PD100/PD100P, PD100A/
PD100AP, PD150/PD150P, 250/250P, etc.). However,
the type of signal recorded and where it is recorded (on
the tape or in the cassette memory) depend on whether
the cassette has cassette memory or which type of
video equipment is used for recording. Please note that
if the signals for a certain search type are not recorded,
you cannot perform that type of search. For details on
the signals used for a particular type of search, refer to
the instruction manual of the recorder.

(The search screens are displayed only on
the Data screen.)

I NDEX SEARCH

CH
1 0 0 / 2 / 2 8 1 : 0 0 LINE
2 0 0 / 3 / 7 1 2 : 5 9 LINE
3 0 0 / 3 / 1 1 3 : 0 5 LINE
4 0 0 / 5 / 5 1 9 : 0 0 LINE
5 0 0 / 7 / 3 1 0 : 1 5 LINE
6 0 0 / 1 0 / 2 8 1 2 : 2 0 LINE

v

q

When selecting INDEX SEARCH

Advertising