Sony DSR-45/45P Manuel d'utilisation

Page 15

Advertising
background image

Chapter 1

Overview

15

(GB)

Chapter 1 Overview

Notes

• To choose whether or not the tape label, title, or data

codes are displayed, use the menu items. Also, you
can select the data code items to be displayed by
pressing the DATA CODE button on the Remote
Commander.

• To adjust the menu items, set the LCD monitor or a

monitor connected to the MONITOR VIDEO jack to
display the menu. When neither of the monitors is set,
you cannot adjust the menu items.

3

DISPLAY SELECT selector

Selects the data items displayed on the LCD monitor
or a monitor connected to the MONITOR VIDEO
jack.

MENU: displays the menu.
DATA: displays time code, remaining tape time, type

of input signal selected, audio mode, presence or
absence of cassette memory, tape label, title, etc.

AUDIO: displays audio levels.

Notes

• You can use the Remote Control Unit (DSRM-20, not

supplied) or the supplied Remote Commander to
search for a scene using search signals on the tape. In
this case, you can search for the scene regardless of
this selector setting.
To display the “–/+” which indicates the direction to
search, set this selector to DATA.

• If you change the selector setting during a search with

the cassette memory, the search aborts.

4

EXEC (execute) or FINE (AUDIO) (fine audio

levels) button
When the DISPLAY SELECT selector 3 is set to
MENU, the button functions as the EXEC (execute)
button. Press this button to change the setting on the
menu items.

For details on the menu, see “Operating the Menus” on
page 76 (GB).

When the DISPLAY SELECT selector 3 is set to
AUDIO, the button functions as the FINE (fine audio
levels) button. While you are holding this button
down, the enlarged audio levels meters are displayed.
You can confirm or adjust audio levels precisely on
these enlarged audio levels meters. To select an
enlarged portion, use REF LEVEL on the AUDIO SET
menu.

For details on fine audio levels screen, see “Fine audio
levels screen” on page 29 (GB).
For details on the AUDIO SET menu, see “AUDIO SET
menu” on page 88 (GB).

5

J / j buttons

When the DISPLAY SELECT selector 3 is set to
MENU, you can select a menu item by pressing these
buttons.

For details on the menu, see “Operating the Menus” on
page 76 (GB).

When the DISPLAY SELECT selector 3 is set to
DATA, you can adjust the brightness of the LCD
monitor by pressing these buttons. During the
adjustment, the brightness level is displayed as
illustrated below. It disappears one second after you
have adjusted the brightness.

BRT

Advertising