Setting the time code and user bits – Sony DSR-45/45P Manuel d'utilisation

Page 60

Advertising
background image

Setting the Time Code and User Bits

Chapter 4 Setting the Time Code and Adjusting the Video Signals

60

(GB)

Chapter 4

Setting the Time Code and Adjusting the Video Signals

3

Press the

J/j buttons to select UB PRESET, then

press the EXEC button.

The following menu appears.

TC ⁄ UB SET

TC PRESET
UB PRESET
TC ⁄ UB IN
DV IN TC
TC MAKE
TC RUN
TC FORMAT
JOG TC OUT
RETURN

TC

RMT

CM

DISP

V

A

VTR

ETC

00 00 00 00

RESET
PRESET
RETURN

4

Press the

J/j buttons to select PRESET, then

press the EXEC button.

The following menu appears.

TC ⁄ UB SET

TC PRESET
UB PRESET
TC ⁄ UB IN
DV IN TC
TC MAKE
TC RUN
TC FORMAT
JOG TC OUT
RETURN

TC

RMT

CM

DISP

V

A

VTR

ETC

O O O O

00 00 00 00

o o o o

SET
CANCEL

5

Set the first two digits. Press the

J/j buttons to

select the number, then press the EXEC button.

6

Repeat step

5

to set the other digits.

7

Press the

J/j buttons to select SET, then press the

EXEC button.

The user bits are set and the menu display returns
to that of step

2

.

8

Press the

J/j buttons to select RETURN, then

press the EXEC button.

The menu display returns to that of step

1

.

To cancel the user bits setting

Select CANCEL in step

7

, then press the EXEC

button.

To reset the user bits

Select RESET in step

4

, then press the EXEC button.

To select the time code/user bits to be
recorded on the tape

You can set the time code and user bits to be recorded
on the tape by setting TC/UB IN on the TC/UB SET
menu.

INTERNAL: Uses the internal time code/user bits.
TC&UB EXT: Uses the external time code/user bits.
TC EXT: Uses the external time code and internal

user bits.

UB EXT: Uses the internal time code and external

user bits.

Notes

• This unit has a DV jack. The time code input or

output is different when you connect the unit to an
external device via this DV jack or via another input/
output connector.

For details, see “DSR-45/45P time codes” on page 63
(GB).

• The time code output from this unit has some

restrictions.

For details, see “Notes on the Time Codes” on page 64
(GB).

To select the time code to be recorded
when DV signals are recorded in DVCAM
format

Set DV IN TC on the TC/UB SET menu to select
whether to record the internal time code or an external
one.

INTERNAL: Records the time code internally

generated.

EXTERNAL: Records the time code with video and

audio signals input via the DV jack.

Notes

• When this item is set to EXTERNAL, the setting of

TC/UB IN on the TC/UB SET menu turns to invalid.
The time code input via the DV jack and the user bits
set in UB PRESET are recorded.

• When you set REC MODE on the VTR SET menu to

DV SP, this item cannot be used. Even if this item is
set to EXTERNAL, when you set REC MODE on the
VTR SET menu to DV SP, the setting becomes
invalid and the unit records the internal time code.

Advertising