Sony DSR-45/45P Manuel d'utilisation

Page 89

Advertising
background image

Chapter 6 Adjusting and Setting Through Menus

Chapter 6

Adjusting and Setting Through Menus

89

(GB)

A

AUDIO SET

Icon/Menu

Submenu

Setting

(page)

REF LEVEL
(page 29 (GB))

Switches the center levels of the audio level meters displayed on the fine audio levels
screen.

–12dB: Sets the level to –12 dB.
–18dB: Sets the level to –18 dB.
–20dB: Sets the level to –20 dB.

Notes

• The default is –20 dB for DSR-45; –18 dB for DSR-45P.
• The standard output level of the AUDIO OUT connectors is +4 dBu. This is equivalent to

–20 dB for the DSR-45, or –18 dB for the DSR-45P from full bit (maximum audio level).
This level is fixed and does not change even if you change this item setting.

• Changing this level does not change the audio gain of this unit. Turn the AUDIO REC

LEVEL control knobs to adjust the recording level accordingly.

AGC CH1,2
(page 29 (GB))

Links/separates the AGC (Auto Gain Control) in channels 1 and 2.

SEPARATE : AGC is not linked. (Channels 1 and 2 sound gains are separated.)
LINKED: AGC is linked. (Channels 1 and 2 sound gains are linked as a pair.)

Notes

• This setting is disabled when inputting signals from the DV jack.
• The LINKED setting changes to enabled after you set the AUDIO INPUT switch on the

front panel to AUTO.

AGC CH3, 4
(page 29 (GB))

Links/separates the AGC (Auto Gain Control) in channels 3 and 4.

SEPARATE : AGC is not linked. (Channels 3 and 4 sound gains are separated.)
LINKED: AGC is linked. (Channels 3 and 4 sound gains are linked as a pair.)

Notes

• This setting is disabled when inputting signals from the DV jack.
• The LINKED setting changes to enabled after you set the AUDIO INPUT switch on the

front panel to AUTO.

LIMITER

Turns the limiter on/off.

OFF : No limiter
ON: Uses the limiter.

Notes

• This setting is disabled when inputting signals from the DV jack.
• This setting is available only when you have set the AUDIO INPUT switch on the front

panel to MANU.

• Make sure to set the INPUT LEVEL selector on the rear panel correctly. Even if you have

set this item to ON, the limiter will not work for a sound that exceeds the dynamic range of
the input amplifier.

Advertising