Detecting a blank portion during duplication – Sony DSR-45/45P Manuel d'utilisation

Page 71

Advertising
background image

Chapter 5 Duplication and Audio Dubbing

Chapter 5

Duplication and Audio Dubbing

71

(GB)

Notes

• You cannot pause during a duplicate process.
• Before you start duplication, make sure that the

player has finished loading the cassette.

• The duplication starts after the i.LINK

communication is established so that the first part of
the source tape is dropped on the copied tape. Play
back the source tape from the preceding point.

• If the player has an auto repeat function, set the

function to off.

• You may not be able to duplicate the first part of the

source tape. Locate the recorded portion on the
source tape, then start duplicating.

• If there is a blank portion on the tape, the first part of

the recorded portion that follows may be dropped on
the copied tape.

• If you start duplication at some midpoint in the tape,

the search function may not work correctly on the
copied tape or problems may occur when editing. It is
recommended that you select AUTOq

or

AUTOq for the duplicate mode.

Detecting a blank portion during
duplication

If the unit detects a blank portion on the source tape
during duplication, the skip function will automatically
skip the blank portion, reducing the length of the
recorded part of the tape. (This function is available
only when the duplicate mode is AUTOq

or

AUTOq.)
The operations of the player and recorder (this unit)
when a blank portion is detected are as follows:

Detected status on
source tape

Detects a blank portion

10 seconds after detection
of a blank portion

Detects next recorded
portion

Returns to the location
immediately before the
blank portion ends

This unit performs the above operations automatically,
reducing the blank portion by 10 or more seconds in
duplicating a tape.

Notes

• If the duplicate mode has been set to MANUALq,

this unit will not skip a blank portion even if detects
one.

• Depending on the specifications, the skip function

may not work on some players.

• When this unit resumes duplication, the first part of

the recorded portion on the source tape may be
dropped on the copied tape.

• A recorded portion of less than one minute between

two blank portions may not be duplicated.

Player/Recorder (this unit)
operation

Player: Continues playing the

tape.

Recorder: Continues

recording.

Player: Continues playing the

tape another 10
seconds and searches
forward.

Recorder: Stops.

Player: Rewinds the tape at

about –2 times normal
speed to the location
immediately before the
blank portion ends.

Recorder: Remains stopped.

Player: After entering the

playback pause mode,
starts playing the tape.

Recorder: After entering the

recording pause
mode, starts
recording.

Advertising