Sony DSR-45/45P Manuel d'utilisation

Page 45

Advertising
background image

Chapter 2

Playback and Recording

45

(GB)

Chapter 2 Playback and Recording

AC timer recording

By connecting this unit to an external AC timer (not
supplied), you can start recording at a preset time.

1

Connect this unit to an external AC timer (not
supplied).

2

Insert a tape for recording.

3

Set the INPUT SELECT selector of this unit to
select the input signal.

4

Set the TIMER selector on the front panel of this
unit to REC.

5

Set the timer-on time on the connected AC timer.

At the preset time, the power of this unit turns on
automatically and recording starts after a few
seconds (no more than 30). Set the timer allowing
a margin for the recording to start. You do not
need to press the REC button.

Note

When you intend to turn the unit off, press the STOP
button on this unit to stop the tape transport operation
beforehand.
If you turn the unit off while a tape is running, for
example, by using an AC timer, the unit or the tape
may be damaged.

DSR-45/45P (rear panel)

If the tape ends before the recording source
stops operation

The tape stops.

To stop recording during timer recording

Press the STOP button on this unit.

To release the AC timer recording mode

Set the TIMER selector on the front panel of this unit
to OFF.

VIDEO IN REF. IN

Recording
source
(external tuner,
etc.)

AC timer

to an AC outlet

Advertising