JVC XV-SA600BK - Manuel (Page 42)

Advanced operations
40
Advanced operations
3
To define a user setting, select a parameter to
be edited using
5/∞ from the followings.
• GAMMA
Controls the brightness of a shaded portion
without changing the brightness of the entire
picture.
This control is optimum when you adjust the
pictures of software which generates subdued
black in a bright room.
The setting range is +4 to -4.
• BRIGHTNESS
Controls the brightness of the screen.
The setting range is +16 to -16.
• CONTRAST
Controls the contrast of the screen.
The setting range is +16 to -16.
• SATURATION
Controls the color depth of the screen.
The setting range is +16 to -16.
• TINT
Controls the tint of the screen.
Use the appearance of a natural complexion as
the guideline.
The setting range is +16 to -16.
• SHARPNESS
Controls the sharpness of the screen.
The setting range is +3 to 0.
• Y DELAY
Controls the color gap of the screen.
The setting range is +2 to -2.
4
Press ENTER.
A window for setting parameters appears instead
of the VFP mode selection window.
Selected parameter
5
Use 5/∞ to adjust the level of the parameter.
The higher value enhances the effect.
6
Press ENTER.
The parameter is set and the VFP mode selection
window appears again.
Repeat steps 3 to 6 if you want to set other
parameters.
Using the 3D PHONIC function, you can get a simulated
surround effect from your stereo system.
¶ During playback
1
Press 3D PHONIC.
The 3D PHONIC window appears on the TV screen.
2
Use 2/3 to select the desired mode.
Each time you press the button, the 3D PHONIC
mode changes as follows:
• ACTION
Suitable for action movies and sports programs
in which sounds dynamically move.
• DRAMA
Natural and warm sound. You can enjoy movies
in a relaxed mood.
• THEATER
You can enjoy sound effects like in a major
theater in Hollywood.
+ 5 SATURATION + 4
NOTES
• The number of setting steps depends on parameters.
• To dismiss the VFP mode selection window:
Press VFP - PROGRESSIVE SCAN.
• The window for VFP mode selection and parameter
setting disappears if no operation is made for about 10
seconds.
• The VFP function cannot be used during JPEG playback.
To simulate surround sound
[3D PHONIC]
Available :
ACTION
DRAMA
THEATER
NONE
Selected effect mode
TV2
2
TV1
1
TV3
3
TV5
5
TV4
4
TV6
6
TV8
8
TV7
7
TV9
9
TV0 0 TV-/-- 10 MUTING +10
TV/VIDEO CANCEL TITLE/ GROUP RETURN
VFP AUDIO SUB TITLE REPEAT
ANGLE DIGEST
3D PHONIC
ZOOM
AMP VOL
PROGRESSIVE SCAN fs/Rate
RM-SXV011J
REMOTE CONTROL
OPEN/
CLOSE
NEXT PREVIOUS
SELECT STROBE CLEAR
SLOW- SLOW+
VOL- VOL+
CH +
CH -
TO P ME NU ME NU
ON SC RE EN CH OIC E
ENTER
STANDBY/ON TV DVD
PAGE
5/∞/2/3
3D PHONIC
+ 5 ACTION 4
S600(J).book Page 40 Friday, May 3, 2002 6:09 PM