JVC XV-SA600BK - Manuel (Page 20)

Basic operations
18
B
a
sic opera
ti
o
ns
Press
3.
The unit starts playback from the beginning.
About screen saver function
• A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the unit
automatically activates the screen saver function if a static
picture, such as an on-screen display or menu, is displayed
for over 5 minutes.
• Pressing any buttons on the unit or the remote control unit
will release the screen saver function and return to the
previous display.
• You can also turn off the screen saver function (see page 60).
About On-screen guide icons
• When you make an operation, you may see the following icons displayed over the picture for about 3 seconds. These have the
following meanings.
You can set the unit not to display these icons below via the preference settings described on page 63.
Press 7.
The unit stops playback.
• If you press 0 OPEN/CLOSE during playback, the unit stops playback and opens the disc tray.
Press 8.
The unit pauses playback. To resume playback, press 3 .
To start playback
Available :
While the screen saver
function is not activated While the screen saver
function is activated
Icon Status
Appears at the beginning of playback mode.
Appears at the beginning of pause mode.
Appears at the beginning of fast forward/backward playback with the current speed (see page 21).
Appears at the beginning of slow-motion playback with the current speed (see page 21).
Appears at the beginning of Repeat playback mode (see page 33).
Appears at the beginning of a scene recorded from multiple angles (see page 37).
Appears at the beginning of a scene recorded with multiple audio languages (see page 36).
Appears at the beginning of a scene recorded with multiple subtitle languages (see page 35).
Appears when the unit does not accept your operation because of disc contents, structure, playback status etc.
Note that some operations are occasionally unacceptable even if is not displayed. (This icon appears even
when ON SCREEN GUIDE in the preference display is set to OFF.)
NOTES
• When the RESUME function is “ON” or “DISC RESUME” and the resume point is memorized, pressing 3 starts playback from
that point instead of the beginning. See page 20.
• During playback, the display window shows the title/chapter, group/track, or track number being played.
• During DVD VIDEO playback, pressing 3 moves back the playback position 10 seconds before the current position. See page 25
for details.
To stop playback completely
Available :
To stop playback temporarily
Available :
S600(J).book Page 18 Friday, May 3, 2002 6:09 PM