JVC XV-SA600BK - Manuel (Page 34)

Advanced operations
32
Advanced operations
4 a
(for DVD AUDIO)
Specify selections in the desired order by
group and track numbers using the numeric
buttons.
• For each program step, using the numeric
buttons, specify a group first, then specify a track.
• For example, to specify “track 14 in group 2,”
Press 2
→ +10 → 4.
4 b
(for SVCD/Video CD/Audio CD)
Specify tracks in the desired order using the
numeric buttons.
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
Examples:
To select 13: +10 → 3
To select 34: +10
→ +10 → +10 → 4
To select 40: +10 → +10 → +10 → 10
Up to 99 tracks can be programmed. You may
select the same track more than once.
The total program time is shown at the right top of
the program table.
• If you specify a wrong track
Use 5/∞ to move to the wrong track, then
press TV/VIDEO - CANCEL. The track is erased
and the subsequent programmed tracks move up.
• To clear the program while programming
Press 7.
5
Press
3 to start program playback.
With a DVD AUDIO/SVCD/Video CD disc, the
program table is automatically dismissed when the
program playback starts.
With an Audio CD disc, the program table remains
on the TV screen during program playback.
However, pressing the ON SCREEN button brings
up the status bar.
When all of the programmed tracks have finished
playback, the unit stops and the program table
appears again.
Note that the program remains.
• To check the program contents
During playback, press 7. Playback stops and the
program table is shown.
When the unit is playing back an Audio CD and the
program table is not shown, you can bring up the
table by carrying out steps 1 to 3.
During DVD AUDIO/SVCD/Video CD playback, you
cannot see the program table during playback.
• To quit program playback
Press 7. Note that the program remains.
• To clear the program
While stopped and the program table is shown on the
TV screen, press
7.
All the programmed tracks are erased.
• To exit the program mode
After clearing all programmed tracks, press ON
SCREEN.
The program table is dismissed and the status bar
appears on the TV screen.
The PROGRAM indicator in the display window
disappears and the unit quits program playback
mode.
Selected group/track number
PROGRAM Total Program Time 00:25:12
No. Group Track Disc
1 2 -
2 3 -
3 7 -
4 4 -
5 3 -
6 5 -
7 6 -
8
9
10
1
5
4
2
3
4
6 9
12
6
8
6
14
20
USE NUMERIC KEYS TO PROGRAM TRACKS.
CANCEL DELETES THE LAST STEP.
7
DELETES ALL.
The total program time
(Program table example for DVD AUDIO)
NOTES
• During program playback, you cannot edit the program
contents.
• During program playback, pressing ¢ skip to the next
selection of the program. Pressing 4 returns to the
beginning of the current selection.
• If you are going to program a track in the bonus group
of a DVD AUDIO, the unit will ask you to enter the key
number for the bonus group (see page 30).
• To dismiss the program table:
Press ON SCREEN. The program table is dismissed and
the status bar is shown.
• To dismiss the menu bar (and the status bar):
Press ON SCREEN.
S600(J).book Page 32 Friday, May 3, 2002 6:09 PM