Sony DCR-TRV38E - Manuel (Page 242)

242
English
Self-diagnosis display
5-digit display Cause and/or Corrective Actions
• You are using a battery pack that is not an “InfoLITHIUM”
battery pack.
c Use an “InfoLITHIUM” battery pack (p. 259).
• Moisture condensation has occurred.
c Eject the cassette and leave your camcorder for at least one
hour to acclimatise (p. 265).
• The video heads are dirty.
c Clean the heads using the cleaning cassette (optional)
(p. 266).
• A malfunction other than the above that you can service has
occurred.
c Eject the cassette and insert it again, then operate your
camcorder. Do not perform this operation if moisture starts
to condense (p. 265).
c Disconnect the mains lead of the AC Adaptor or remove the
battery pack. After reconnecting the power source, operate
your camcorder.
c Replace the cassette.
• A malfunction that you cannot service has occurred.
c Contact your Sony dealer or local authorised Sony service
facility and inform them of the 5-digit code.
(e.g. E:61:10)
If you are unable to rectify the problem even if you try corrective actions a few times, contact your
Sony dealer or local authorised Sony service facility.
Your camcorder has a self-diagnosis display function.
This function displays the current condition of your
camcorder as a 5-digit code (a combination of a letter
and figures) on the LCD screen, viewfinder or display
window. If a 5-digit code appears, check the following
code chart. The last two digits (indicated by ss) will
differ depending on the state of your camcorder.
LCD screen, Viewfinder or
display window
Self-diagnosis display
• C:ss:ss
You can service your camcorder yourself.
• E:ss:ss
Contact your Sony dealer or local
authorised Sony service facility.
C:04:ss
C:21:ss
C:22:ss
C:31:ss
C:32:ss
E:20:ss
E:61:ss
E:62:ss
C:21:00