Installation, Technical specifications - commander 400 – Lincoln Electric COMMANDER 400 SVM133-B Manuel d'utilisation
Page 8
A-2
A-2
COMMANDER 400
INSTALLATION
TECHNICAL SPECIFICATIONS - Commander 400
Make/Model
Description
Speed (RPM)
Displacement
Starting
Capacities
System
Deutz
3 cylinder
High Idle 1900
173 cu. in
12VDC battery
Fuel: 25 gal.
F3L 912 Diesel
44.2 HP(33kw)
Low Idle 1350
(2.827 L)
& Starter
94.6 L
Engine
@ 1800 RPM
Full Load 1800
Bore x Stroke
Oil: 8.5 Qts.
8.04 L
3.94” x 4.72”
(100mm x 120mm)
INPUT - DIESEL ENGINE
RATED OUTPUT - WELDER
HEIGHT
2
WIDTH
DEPTH
WEIGHT
42.0 in.
31.5 in.
63.1 in.
1650 lbs.(748 kg)
(Stick model)
1066.8 mm
800.1 mm
1602.7 mm
1683 lbs.(763 kg)
(Stick & Wire model)
OUTPUT - WELDER AND GENERATOR
Duty Cycle
Welding Output
Volts at Rated Amps
100%
400 amps (DC Constant Current)
40 volts
400 amps (DC Constant Voltage)
40 volts
60%
500 amps (DC Constant Current)
40 volts
500 amps (DC Constant Voltage)
40 volts
Welding Range
Open Circuit Voltage
Auxiliary Power
1
40 - 575 Amps
64-74 OCV
120/240 VAC
in 7 Ranges (Stick model)
10,000 Watts, 60 Hz.
or 8 Ranges (Stick & Wire model)
@1915 RPM
100% Duty Cycle
PHYSICAL DIMENSIONS
1. Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2. Top of Enclosure. Add 6.64” (168.7mm) for exhaust.