Before requesting service, Power source, Playback – Panasonic AG-456UP Manuel d'utilisation

Page 66

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

ENGLISH

Before Requesting Service

Power Source

Symptom

Cause

Action

Reference

Pages

•V\ftien using the Battery Pack: ■

Movie Camera does not turn on.

I

^ •Battery Pack is not attached.

•Attach it correctly.

13

^ •Battery Pack is not charged.

•Charge it.

12

•When using the Battery Pack:

Movie Camera turns off soon,

1

^

•Battery Pack is e)^hausted.

•Use a fully charged one.

12

^ •Recording was paused for more than 5 minutes.

•Slide the [POWER] Switch backward to turn the

Movie Camera on.

25

•When using the AC Adaptor:

Movie Camera does not turn on.

^

eAC Adaptor is not connected.

•Connect AC Adaptor correctly to Movie Camera.

14

• Movie Camera turns oft soon. •Dew has formed inside.

•Wait serveral hours.

58

Recording

•No picture appears in the Viewfinder.

^

•Movie Camera does not turn on.

•Slide the [POWER] Switch backward to turn the

Movie Camera on.

25

^

•Lens Cap is attached.

•Remove it.

19

• Indications in the Viewfinder are not p

clear.

1

k

•Eyepiece Corrector is not adjusted.

•Adjust it.

17

•Lens is covered with dust or dirt.

•Clean it.

18

•Recording cannot be started.

k

•Tab of the inserted cassette is broken out.

•Cover the tab hole with adhesive tape.

20

k

•No cassette is inserted.

•Insert a cassette with intact erasure prevention

tab.

20

eTape has reached its end.

•Insert a new video cassette.

20

•Date and time cannot be recorded.

^

•Date and time are not set.

•Set the date and time.

15

•Date and time are not displayed in

the^p

[DATE/TIME] Button was not pressed.

Viewfinder. I

•Press the [DATE/TIME] Button

17

Playback

•No playback picture is reproduced.

p

^ *Movie Camera does not turn on.

•Slide the [POWER] Switch backward to turn the

Movie Camera on.

48

^ •Movie Camera is not connected to TV set or it is

connected incorrectly.

•Connect Movie Camera to TV set correctly.

51

^ eWrong channel is selected on TV set.

•Select the correct channel.

•Picture contains noise bars. 9 •Cue, Reviewer Still Playback is being performed.

•This is not a malfunction.

50

•Picture is not in colour or distorted. ^ •Tracking is not adjusted.

•Adjust the tracking on the Movie Camera.

49

(66)

Advertising