Using the macro function, 2 approach the subject to the desired distance, 3 press the start/stop button – Panasonic AG-456UP Manuel d'utilisation

Page 108: Prise de vues avec fonction macro, 2 se rapprocher du sujet selon (a distance désirée, O appuyer sur la touche de mise en marche/ arrêt, Plan rapproché)

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

ENGLISH

FRANÇAIS

Using the Macro Function

The Macro Close-up Function makes it possible to shoot very small

objects, photos, printed matter, insects and many other things.

1

Keep pressing to zoom to the maximum wide-

angle position.

2

Approach the subject to the desired distance.

•The focus will be adjusted automatically (Auto Focus Mode).

3

Press the Start/Stop Button.

•The recording starts.

Hints for Recording with the Macro Close-up Function

•To get more or less of the subject into the picture, change the

distance between the lens and the subject; do not use the (W) or

[T] Zoom Button.

•As the depth of field is very small in macro shooting, even slight

camera movements can cause the subject to go out of focus.

Therefore, it is recommended to use a tripod.

•When the zoom lens is in its maximum telephoto position, the

minimum recording distance between lens and subject is 1.5 m.

• In macro close-up shooting, the subject can be approached down

to a minimum distance of 4 cm between lens and subject.

It is recommended to use the Auto Focus Mode. However, with a

stable camera position (tripod, etc.), the Manual Focus Mode can

also be used.

Prise de vues avec fonction macro

(Plan rapproché)

Cette fonction permet d'effectuer une prise de vues sur des objets

très petits, des photos, des imprimés, des insectes et bien d’autres.

1

Maintenir une pression sur cette touche afin

d’obtenir un grand-angulaire maximal,

2

Se rapprocher du sujet selon (a distance

désirée.

•La mise au point se fait automatiquement (mode de mise au

point automatique).

O Appuyer sur la touche de mise en marche/

arrêt.

• La prise de vues débute.

Conseils concernant la prise de vues avec fonction macro

•Pour varier la grandeur du sujet par rapport à l'image, faire varier

la distance entre l’objectif et le sujet; ne pas se servir des touches

de focale [W] ou [T)-

•Comme la profondeur de champ est très faible en prise de vues

macro, même les plus légers mouvements de caméra peuvent

suffire à dérégler la mise au point du sujet. Il est donc

recommandé d'utifiser un trépied.

•Lorsque l’objectif est à la position téléobjectif maximale, la

distance minimale entre le sujet et l'objectif doit être de 1,5 m.

•Lors d'une prise de vues en macro, la distance minimale entre

l'objectif et le sujet est de 4 cm.

Il est recommandé d'utiliser le mode automatique de mise au

point. Toutefois, si le camescope est en position stable (avec

l’utilisation d’un trépied), le mode manuel de mise au point peut

également être utilisé.

(36)

Advertising