Before requesting service, Power source, Recording – Panasonic AG-456UP Manuel d'utilisation
Page 138: English
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
ENGLISH
Before Requesting Service
Power Source
Symptom
Cause
Action
Reference
Pages
•When using the Battery Pack;
■
Movie Camera does not turn on.
I
^ »Battery Pack is not attached.
•Attach it correctly.
13
^ «Battery Pack is not charged.
•Charge it.
12
•When using the Battery Pack: ■
Movie Camera turns off soon. |
► «Battery Pack is ei^hausted.
•Use a fully charged one.
12
► »Recording \«as paused for more than 5 minutes.
•Slide the [POWER) Switch backward to turn the
Movie Camera on.
25
•When using the AC Adaptor: ■
Movie Camera does not turn on.
^ *AC Adaptor is not connected.
•Connect AC Adaptor correctly to Movie Camera.
14
•Movie Camera turns off soon. ■
► «Dew has formed inside.
•Wait serveral hours.
58
Recording
•No picture appears in the Viewfinder,
► »Movie Camera does not turn on.
•Slide the [POWER] Switch backward to turn the
Movie Camera on.
25
^ «Lens Cap is attached.
•Remove it.
19
•Indications in the Viewfinder are not
clear.
► »Eyepiece Corrector is not adjusted.
•Adjust it.
17
»Lens is covered with dust or dirt.
•Clean it.
18
• Recording cannot be started.
•• »Tab of the inserted cassette is broken out.
•Cover the tab hole with adhesive tape.
20
»No cassette is inserted.
•Insert a cassette with intact erasure prevention
tab.
20
»Tape has reached its end.
•Insert a new video cassette.
20
•Date and time cannot be recorded.
«Date and time are not set.
•Set the date and time.
15
•Date and time are not displayed in the
Viewfinder.
■k [DATE/TIME] Button was not pressed.
•Press the [DATE/TIME] Button
17
Playback
•No playback picture is reproduced.
ik »Movie Camera does not turn on.
•Slide the [POWER] Switch backward to turn the
Movie Camera on.
48
ik «Movie Camera is not connected to TV set or it is
1 connected incorrectly.
•Connect Movie Camera to TV set correctly.
51
M »Wrong channel is selected on TV set.
•Select the correct channel.
—
•Picture contains noise bars.
■k »Cue, Review or Still Playback is being performed.
•This is not a malfunction.
50
•Picture is not in colour or distorted.
■k «Tracking is not adjusted.
•Adjust the tracking on the Movie Camera.
49
(66)