Garland MASTER SERIES HEAVY DUTY GAS RANGES AND CHAR BROILERS, ALL M/MS/MST SERIES MODELS - Manuel (Page 10)

Part # 1382680 Rev 3 (05/10/11) Page 10
5. Align and insert stud into rail center support bracket.
Assemble nut and washer to stud after alignment.
A
A
Insert counter sink screw
and nut into top of flange of
range. 2 sides per range
6. Final Assembly:
After rail has been assembled insert flathead screw and
nut to attach rail to top side of range.
A. Adjust rail level and position with nuts between rail
and bracket and secure adjustment with nuts below
the bracket. When adjustment is complete tighten
countersunk screw and nut.
A
7. Final assembly Option: If an end enclosure is required
the end enclosure bracket should be installed during rail
assembly, step #4. Mount bracket over studs and tighten
against underside of rail (A).
End Enclosure Parts
End Enclosure Rt/Lt
End Enclosure Bracket
INSTALLATION Continued