4 check ip communication with controller, Check ip communication with controller, Figure 59: network connections screen – MaxPower Corp Gamatronic Power+ M50 Manuel d'utilisation
Page 65
Gamatronic Electronic Industries Ltd.
POWER+ 3x208 V, User Guide, Release 2.3
49
5.10.4 Check IP Communication with Controller
This test is designed to verify that the System Controller is properly configured for
communication and that the Web server built-in into the System Controller is functioning
properly.
1.
Use an RJ45-to-RJ45 crossed cable to attach a laptop computer to the Ethernet
(RJ45) port on the rear panel of the System Controller.
2.
Configure the Network Connections of the laptop computer to make sure the
computer is in the same domain as the UPS. (Note: the details of the following
configuration procedure are for the Windows XP operating system. The configuration
procedure will differ for other operating systems.)
a.
Right click on the My Network Places icon on your desktop and select
Properties.
Figure 59: Network Connections screen
b.
When the Network Connections screen appears, right-click on Local Area
Connection and select Properties.