MaxPower Corp Gamatronic Power+ M50 - Manuel (Page 13)

Gamatronic Electronic Industries Ltd.
POWER+ 3x208 V, User Guide, Release 2.3 xiii
S
AFETY
C
ONSIDERATIONS
The POWER+
UPS system is designed for industrial applications and harsh environments.
Nevertheless, the POWER+
UPS system is a sophisticated power system and should be
handled with appropriate care, following these guidelines.
Do’s …

READ THIS MANUAL CAREFULLY before starting installation and operation of the
UPS.

SAVE THESE INSTRUCTIONS. This manual contains important instructions that must
be followed during installation and maintenance of the UPS and batteries.
 REVIEW THE SAFETY PRECAUTIONS described below to avoid injury to users or
damaging equipment.
 All power connections must be completed by a licensed electrician who is experienced
in wiring this type of equipment, and who is knowledgeable about all federal, state, and
local electrical codes and regulations. Improper wiring may cause damage to the
equipment or injury to personnel.

Pay attention to the warning signs, labels and marks on the unit. A warning sign signals
the presence of a possibly serious, life-threatening condition.
 Keep the surroundings clean, uncluttered and free from excess moisture.
 Allow only qualified technicians to service the UPS. There are no user-serviceable
components. Do not try to repair it yourself!
 Use the UPS only for its intended purpose.
CAUTION - WARNING - RISK OF LETHAL ELECTRIC SHOCK:
The battery drawer contains a series of 12-Volt batteries that
provide high voltage and energy in the UPS body even when the
UPS is not connected to the ac input. Appropriate precautions
should be taken during installation, inspection and servicing.
CAUTION - WARNING - RISK OF LETHAL ELECTRIC SHOCK:
The UPS receives power from more than one source.
Disconnection of all of the ac sources and the dc source is
required to de-energize this unit before servicing.
ATTENTION - AVERTISSEMENT - RISQUE DE DÉCHARGE ÉLECTRIQUE
MORTELLE :
Le tiroir de batterie contient une série de batteries 12-Volt qui
fournissent la haute tension et l'énergie dans le corps D'UPS
même lorsque L'UPS n'est pas relié à l'entrée à A.C. Des
précautions appropriées devraient être prises pendant
l'installation, l'inspection et l'entretien.