Figure 255: sc2012 menu, Figure 256: sc2012 menu, Figure 257: network menu – MaxPower Corp Gamatronic Power+ M50 Manuel d'utilisation
Page 137: Figure 258: setting an ip address
Gamatronic Electronic Industries Ltd.
POWER+ 3x208 V, User Guide, Release 2.3
121
3. Select
Factory settings:
[Main Menu > SETUP > (password) > Ent > Service > SC2012]
1> Restart controller 3> Network…
2> Factory settings 4> Reset MBX
Your selection: 1 5> --------------
Enter if you are sure (else press Esc.!)
Figure 255: SC2012 menu
Default settings are implemented, a confirmation screen appears briefly and then the
controller restarts.
4. Select
Network:
[Main Menu > SETUP > (password) > Ent > Service > SC2012]
1> Restart controller 3> Network…
2> Factory settings 4> Reset MBX
Your selection: 1 5> --------------
Enter if you are sure (else press Esc.!)
Figure 256: SC2012 menu
5. Select
Set IP ADDRESS:
[Main Menu > SETUP > (password) > Ent > Service > SC2012 > Network]
1> Set IP ADDRESS 157.211.000.253
2> Set GATEWAY 157.211.000.251
3> Set MASK 255.255.255.000
4> Store 5> SNMP factor Select:1
Figure 257: Network menu
6.
Use the arrows keys to set an IP address and press Ent:
[Main Menu > SETUP > (password) > Ent > Service > SC2012 > Network > Set IP ADDRESS]
Set IP ADDRESS
157.211.000.252
Figure 258: Setting an IP address