Breville BOV450XL - Manuel (Page 41)

40
10. The pizza cycle can be stopped at any
time by pressing the START/CANCEL
button. This will cancel the cycle, the
button surround illumination will go out
and the LCD will illuminate blue.
A note on pizza stones
When using a pizza stone, it is necessary
to fi rst heat the stone (without a pizza) for
optimum results.
1. Insert the wire rack into the middle
rack height position. The wire rack
should be positioned with the spokes
facing upwards.
2. Place the pizza stone on the center of the
wire rack so air fl ows around the sides of
the stone.
3. Close the oven door.
4. Press the START/CANCEL button
to activate this setting. The button
surround will illuminate red, the oven
alert will sound, and the LCD screen will
illuminate orange.
5. The LCD screen will indicate a blinking
‘PREHEATING’. Once the oven has
reached the set temperature, the
temperature alert will sound.
6. The timer will be displayed and
automatically begin to count down in
one minute increments.
7. At the end of the pizza stone heating
cycle, the oven alert will sound three
times, the START/CANCEL button will
cease to illuminate and the LCD back
light will illuminate blue.
8. Now carefully place the frozen pizza on
the heated pizza stone.
9. Select the desired pizza setting and
press the START/CANCEL button to
restart the pizza cycle.
NOTE
If cooking a fresh pizza, we
recommend using protective hot pads
or insulated oven mitts to remove
the entire wire rack with pizza stone,
and place on the open oven door or
bench. This will assist in transferring
the fresh pizza dough onto the heated
pizza stone. Always use protective hot
pads or insulated oven mitts to re-
insert the wire rack with pizza stone
and pizza, inside the oven.
OPERATING YOUR BREVILLE MINI SMART OVEN™