Rockwell Automation 1756-SPESMNRMXT GuardLogix Controllers User Manual - Manuel (Page 18)

18 Rockwell Automation Publication 1756-UM020I-EN-P - August 2012
Chapter 1 System Overview
Selecting System Hardware The GuardLogix system supports SIL 3 and PLe safety applications. The
GuardLogix controller is made up of a primary controller and a safety partner
that function together in a 1oo2 architecture.
Table 4 lists catalog numbers for
primary controllers and safety partners.
The safety partner must be installed in the slot immediately to the right of the
primary controller. The firmware major and minor revisions of the primary
controller and safety partner must match exactly to establish the control
partnership required for safety applications.
Primary Controller
The primary controller is the processor that performs standard and safety
functions and communicates with the safety partner for safety-related functions
in the GuardLogix control system. Standard functions include the following.
• I/O control
• Logic
• Timing
• Counting
• Report generation
• Communication
• Arithmetic computations
• Data file manipulation
The primary controller consists of a central processor, I/O interface, and
memory.
In RSLogix 5000 software, version 18 or later, the GuardLogix controller
supports OS upgrades or user program storage and retrieval by using a memory
card. However, in version 16 and 17 of RSLogix 5000 software, you could only
Table 4 - Primary Controller and Corresponding Safety Partner Catalog Numbers
Primary Controller Safety Partner
1756-L61S, 1756-L62S, 1756-L63S 1756-LSP
1756-L71S, 1756-L72S, 1756-L73S 1756-L7SP
1756-L73SXT 1756-L7SPXT
Table 5 - Memory Capacity
Cat. No.
User Memory (RAM capacity)
Standard Tasks and Components Safety Task and Components
1756-L61S 2 MB 1 MB
1756-L62S 4 MB 1 MB
1756-L63S 8 MB 3.75 MB
1756-L71S 2MB 1 MB
1756-L72S 4 MB 2 MB
1756-L73S,1756-L73SXT 8 MB 4 MB