Additional resources – Rockwell Automation 1756-SPESMNRMXT GuardLogix Controllers User Manual Manuel d'utilisation
Page 13
Rockwell Automation Publication 1756-UM020I-EN-P - August 2012
13
Preface
Additional Resources
These documents contain additional information concerning related products
from Rockwell Automation.
Table 3 - Publications Related to GuardLogix Controllers and Systems
For more information about
See This Resource
Description
(Safety) Application requirements
GuardLogix Controller Systems Safety Reference Manual,
publication
Contains detailed requirements for achieving and maintaining SIL
3/PLe with the GuardLogix controller system.
Batteries
Guidelines for Handling Lithium Batteries, publicatio
Provides information regarding storage, handling, transportation, and
disposal of lithium batteries.
Programmable Controllers Battery Reference,
Provides Material Safety Data Sheets (MSDS) for individual
replacement batteries.
CIP sync
(time synchronization)
Integrated Architecture and CIP Sync Configuration Application
Technique, publicat
Provides detailed and comprehensive information about how to apply
CIP Sync technology to synchronize clocks in a Logix control system.
Design and selection
Logix5000 Controllers Design Considerations Reference Manual,
publication
Provides advanced users with guidelines for system optimization and
with system information to guide system design choices.
ControlLogix Selection Guide, publicatio
Provides a high-level selection process for ControlLogix® system
components, critical specifications information for making initial
decisions, and links to complete specifications information.
Guard I/O
Guard I/O DeviceNet Safety Modules User Manual, publication
Provides information on using Guard I/O DeviceNet Safety modules.
Guard I/O EtherNet/IP Safety Modules User Manual, publication
Provides information on using Guard I/O EtherNet/IP Safety modules.
POINT Guard I/O Safety Modules User Manual, publication
Provides information on installing, configuring, and using POINT
Guard I/O™ modules.
Hardware installation
ControlLogix Chassis and Power Supplies Installation
Instructions, publicat
Describes how to install and ground ControlLogix chassis and power
supplies.
Industrial Automation Wiring and Grounding Guidelines,
publication
Provides in-depth information on grounding and wiring
programmable controllers
Instructions (programming)
GuardLogix Safety Application Instruction Set Reference Manual,
publication
Provides information on the GuardLogix Safety application instruction
set.
Logix5000 Controllers General Instructions Reference Manual,
publication
Provides programmers with details about each available instruction
for a Logix5000 controller.
Logix5000 Controllers Motion Instructions Reference Manual,
publication
Provides programmers with details about the motion instructions that
are available for a Logix5000 controller.
Motion
SERCOS Motion Configuration and Startup User Manual,
publication
Details how to configure a SERCOS motion application system.
Motion Coordinated Systems User Manual, publicat
Details how to create and configure a coordinated motion application
system.
CIP Motion Configuration and Startup User Manual, publicat
Details how to configure a Integrated Motion on EtherNet/IP networks
application system.
CIP Motion Reference Manual, publication
Detailed information on axis control modes and attributes for
Integrated Motion on EtherNet/IP networks.
Networks (ControlNet, DeviceNet
EtherNet/IP)
EtherNet/IP Modules in Logix5000 Control Systems User Manual,
publication
Describes how to configure and operate EtherNet/IP modules in a
Logix5000™ control system.
ControlNet Modules in Logix5000 Control Systems User Manual,
publication
Describes how to configure and operate ControlNet modules in a
Logix5000 control system.
DeviceNet Modules in Logix5000 Control Systems User Manual,
publication
Describes how to configure and operate DeviceNet modules in a
Logix5000 control system.
PhaseManager™
PhaseManager User Manual, publication
Provides steps, guidance, and examples for setting up and
programming a Logix5000 controller to use equipment phases.