Analog Way Octo Fade - OFD802 - Manuel (Page 27)

OCTO range Chapter 6 : LCD FUNCTIONS DESCRIPTION (continued)
PAGE 27
8-9 [default value] + ENTER.
This function allows setting the following functions to the factory settings. Select [YES] and validate with ENTER.
FUNCTION POSITION
1-2 [input type] Computer HV/C.
1-3 [used input] All used.
1-4 [H sync load] All Hi-Z.
1-5 [VCR mode] All off
2-2 [output format] XGA 60Hz 4/3.
2-3 [output sync] H&V.
2-4 [type of screen] 4/3
2-4 [test pattern] no
3-1 [fast switching] internal rate
4-2 [pos. settings] 0
4-3 [aspect ratio] 4/3 standard
4-4 [H. smooth] OFF
4-5 [brightness] 0
4-5 [black level] 0
4-6 [contrast] 0
4-6 [color] 0
4-7 [color] 0
4-7 [optimize] 0
4-8 [hue] 0
4-9 [under/overscan] overscan
4-10 [sharpness] 3
5-1 [master volume] 191
5-2 [audio source] auto follow
5-3 [audio level] 48
5-4 [audio balance] 0
5-5-1 [tone] 0
5-5-2 [compression] 2/1
5-5-3 [noise gate] low
5-5-4-1 [threshold] 191
5-5-4-2 [depth] 5
5-5-4-3 [release time] slow
5-6 [mute] OFF
6-1-1 [display] all ON
6-1-2 [assignment] all none
7-2 [shadow title] OFF
8-2 [key locking] all unlock
8-3-1 [fade color] R, G, B = - 64
8-4 [freeze button] freeze
8-4 [effect key] cut fade title
8-5 [2:2 pull down] auto
8-6 [RS232/LAN port] RS232
FREEZE inactive.
9
[FREEZE __ ]
Allows to freeze the displayed output. Press ENTER to change the status.
[FREEZE OFF]: The displayed output is unfreeze.
[FREEZE ON]: The displayed output is freeze.