Charging the battery pack, How to use the battery pack, Utilisation du bloc-piles – Samsung SC-MM10S-XAA Manuel d'utilisation

Page 30: Charge du bloc-piles

Advertising
background image

24

24

ENGLISH

FRANÇAIS

How to Use the Battery Pack

Charging the Battery Pack

1. Turn off the Memory Camcorder

by pressing the [POWER] button.

2. Insert the battery pack to the

unit.

3. Open the connector cover of the

unit.

4. Charge the battery pack

by

using

AC Power Adapter or USB Cable.

AC Power

Adapter

Connect the AC Power

Adapter with the Memory

Camcorder and plug the

AC Power Adapter to the

wall outlet.

USB Cable

Connect the USB

Cable with the Memory

Camcorder and connect

the other side to a USB

port

on your PC

[ Warning ]

✤ It is recommended you fully charge

the battery pack before use.

You should only charge the battery

in an environment between 32°F

and 104°F.

If ambient temperature is too low

when charging, the battery may take

a long time to fully charge, or may

not charge completely and the green

indicator will not turn on.

✤ Before connecting the cable, make

sure that you don’t have any foreign

substances between connectors.

Utilisation du bloc-piles

Charge du bloc-piles

1. Mettez le Caméscope à mémoire

hors tension en appuyant sur le

bouton [POWER].

2. Insérez le bloc-piles

3. Soulevez le couvercle du

connecteur.

4. Chargez le bloc-piles à l’aide de l’

adaptateur CA ou du câble USB.

Adaptateur

CA

Raccordez correctement

l’adaptateur CA au

Caméscope à mémoire

et branchez l’adaptateur

dans une prise murale.

Câble USB

Raccordez correctement le

câble USB au Caméscope

à mémoire et raccordez l’

autre bout au port USB d’

un ordinateur.

[ Avertissement ]

✤ Il est recommandé de recharger

complètement le bloc-piles avant

toute utilisation.

✤ Le bloc-piles doit être rechargé à

une température comprise entre 0 °

C et 40 °C (32 °F et 104 °F).

✤ Si la température ambiante est trop

basse, le temps de chargement peut

être prolongé ou le bloc-piles pourrait

ne pas se charger complètement ; le

témoin vert ne s’allumera donc pas.

✤ Avant de raccorder le câble, veillez

à ce qu’il ne se trouve aucun débris

entre les connecteurs.

Connecting the AC Power Adapter

DC IN jack

Connecting the USB Cable

USB

MMC/SD

USB port

USB

SD

USB

/SD

SC-MM11-01064A-IB-USA+FRC.indb 24

SC-MM11-01064A-IB-USA+FRC.indb 24

2006-03-27 오후 4:06:14

2006-03-27 오후 4:06:14

Advertising