Yamaha HTR-6150 - Manuel (Page 59)

55
En
SIRIUS Satellite Radio™ tuning
English
BA
S
IC
OPERA
T
ION
■ All Channel Search mode
1
Press D
SEARCH MODE (or MSRCH
MODE) repeatedly to select “ALL CH
SEARCH”.
2
Press G
PRESET/TUNING/CH l / h (or
8 PRESET/CH k / n) repeatedly to search
for a channel within all channels.
y
• You can search for a channel quickly by pressing and holding
GPRESET/TUNING/CH l / h
(or 8PRESET/CH k / n).
• You can skip channels to the previous or next category by
pressing F
CATEGORY (or 8A-E/CAT. l / h).
■ Category Search mode
1
Press D
SEARCH MODE (or MSRCH
MODE) repeatedly to select “CAT SEARCH”.
2
Press F
CATEGORY (or 8A-E/CAT. l / h)
repeatedly to change the channel category.
3
Press G
PRESET/TUNING/CH l / h (or
8 PRESET/CH k / n) repeatedly to search
for a channel within the selected channel
category.
y
You can search for a channel quickly by pressing and holding
GPRESET/TUNING/CH l / h (or 8PRESET/CH k / n).
This unit skips the channels when this unit is All Channel Search
mode or Category Search mode in the following cases (it is not
malfunction of this unit):
– the channel is locked (see page 56).
– the channel is out of service.
– you do not subscribe to the channel.
■ Preset Search mode
Prior to selecting a preset channel in the Preset Search
mode, you must preset SIRIUS channels. For details, see
“Setting the SIRIUS Satellite Radio™ preset channels” on
page 56.
1
Press D
SEARCH MODE (or MSRCH
MODE) repeatedly to select “PRESET
SEARCH”.
2
Press F
CATEGORY (or 8A-E/CAT. l / h)
repeatedly to change the preset channel
group (A to E).
3
Press G
PRESET/TUNING/CH l / h (or
8 PRESET/CH k / n) repeatedly to change
the preset channel number (1 to 8).
y
You can also select the preset channel number directly by
pressing the numeric buttons (1 to 8) (G).
■ Direct Number Access mode
1
Press M
SRCH MODE on the remote control
repeatedly to select “ALL CH SEARCH” or
“CAT SEARCH”.
2
Press the numeric buttons (G) to enter the
desired three-digit channel number.
For example, to enter the number 123, press the
numeric buttons (G) as shown below.
y
• To display the SIRIUS Radio ID (SID) number displayed in the
front panel display, select channel “0”.
• To enter a one-digit or two-digit channel number, press the
numeric buttons (G) on the remote control and then press
TENT to confirm the input number.
• Instead of pressing TENT to tune into the channel
immediately, you can wait a few seconds until this unit confirms
the entered channel number.
• Pressing a button other than the numeric buttons (G) or TENT
cancels the Direct Number Access mode procedure.
• If the selected channel is locked, “PIN:____” appears in the
front panel display. Enter the four-digit Parental Lock code
number by using the numeric buttons (G) or press TENT to
cancel.
Before performing the following operations, press
KSIRIUS.
Note
1 2 3
01EN_HTR-6150_UC.book Page 55 Friday, February 1, 2008 11:21 AM