Yamaha HTR-6150 - Manuel (Page 34)

SELECTING THE SCENE TEMPLATES
30
En
This unit is equipped with 17 preset SCENE templates for
various situations of using this unit. As the initial factory
setting, the following SCENE templates are assigned to
each SCENE button:
SCENE 1: DVD Viewing
SCENE 2: Disc Listening
SCENE 3: TV Viewing
SCENE 4: Radio Listening
If you want to use other SCENE templates, you can select
the desired SCENE templates from the SCENE template
library and assign the templates to the selected SCENE
buttons on the front panel and the remote control.
1
Press and hold the desired T
SCENE (or
6 SCENE) button for 3 seconds.
The indicator on the selected SCENE button on the
front panel starts to flash, and the name of the
currently assigned SCENE template appears in the
front panel display.
2
Press R
INPUT l / h (or press 5AMP and
then press 8l / h) to select the desired
template.
3
Press the T
SCENE (or 6SCENE) button
again to confirm the selection.
The selected SCENE template is assigned to the
button.
Once the desired SCENE templates are assigned to the
corresponding SCENE buttons, you may need to set the input
source of the SCENE template on the remote control. See page 34
for details.
Selecting the SCENE templates
Selecting the desired SCENE
template
1
SCENE template library
(Image)
Select the desired SCENE
template
Assign the
SCENE
template to the
SCENE button
1
DVD Viewing
1
1
or
Remote control
Flashes
3 seconds 3 seconds
Front panel
Note
l INPUT h
AMP
ENTER
DVD Movie View
or
Front panel
Remote control
1 1 or
Remote control Front panel
01EN_HTR-6150_UC.book Page 30 Friday, February 1, 2008 11:21 AM