1 explanation of the function buttons – Rinnai Q130SN Manuel d'utilisation

Page 46

Advertising
background image

Installation & Servicing Instructions Rinnai Q-Series

46

9.1 Explanation of the function buttons

When the pump is

switched on continuously

it can lead to undesired

heating up of the central

heating system during the

summer.

NOTICE

i

NOTICE

i

Only qualified personel who are trained for servicing these boilers are permitted

to make alterations in the controller to calibrate the boiler to the installation.

1. Display. See previous page for further information.

2. ON-OFF Switch

This switch turns the power supply to the boiler on or off.

Only turn the boiler off using this switch, when the burner is off.

3. Central Heating program button.

Switching the Central Heating on or off (LED on/off);

4. Hot Water program button.

Switching the Domestic Hot Water (DHW) facility on or off (LED on/off);

5. Pump program button.

adjusts the pump to continuous water circulation in the central heating system (LED
on), or according to the pump overrun times on the relevant programs (LED off);

6 Mode-button.

After briefly pressing, a selection of the data chapters can be retrieved.

After pressing for 5 seconds it is possible to enter the code as described in chapter

11.3;

7 Step-button.

After briefly pressing, the water pressure can be retrieved and pages per chapter
can be retrieved.

After pressing for 5 seconds it switches from the Good-state to technical read out

and vice versa;

8 Reset-button.

After briefly pressing, for:

- unlocking errors;

- ending the access code;

After pressing for 5 seconds an operating stop is made, for example, for activating

the automatic venting program.

Some buttons have other functions.These functions are only active when according
to the procedure described in chapter 11, adjustment has to be changed or data must
be retreived from the CMS. The other functions are:

3. Central Heating program button :

+

function;

4. Hot Water program button:

-

function;

5. Pump program button :

store-function, which means that by means

of this button a modified setting is confirmed;

7. Step-button:

scrolling in a data chapter.

1

3

4

5

6

2

7

8

!

CAUTION

Boiler control panel

figure 23

Advertising
Ce manuel est liée aux produits suivants: