Analog Way Octo-Quattro - OTR401 - Manuel (Page 16)

Chapter 5 : LCD FUNCTIONS DESCRIPTION (continued) OCTO-QUATTRO™
PAGE 16
• If the selected input is a VIDEO signal (input type =SDTV---) the IMAGE MENU displays the following items:
4-5 [brightness] + ENTER.
Adjust the Brightness with  + ENTER.
4-6 [contrast] + ENTER.
Adjust the Contrast with  + ENTER.
4-7 [color] + ENTER.
Adjust the Color with  + ENTER.
4-8 [hue] + ENTER.
Adjust the Tint of the picture (NTSC only) with  + ENTER.
4-9 [u / over scan] + ENTER.
Select Underscan or Overscan with  + ENTER.
• [underscan] = Underscan mode. The entire image is visible on the screen. Computer mode is underscan.
• [overscan] = Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid
seeing the corners and the borders. Standard TV display mode is overscan.
4-10 [sharpness] + ENTER.
This function allows increasing the sharpness of the image. Select a level with + ENTER.
4-11 [preset] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with ENTER.
• If the selected input is a COMPUTER signal (input type = Computer---) the IMAGE MENU displays:
4-5 [black level] + ENTER.
Adjust the black level with  + ENTER.
4-6 [color] + ENTER.
Select a color (Red, Green, or Bleu) with  + ENTER and adjust the level with  + ENTER.
4-7 [optimize] + ENTER.
Select an item with  + ENTER.
• [clock] = Manual adjustment of the pixel clock.
• [phase] = Manual adjustment of the pixel phase.
4-8 [preset] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with ENTER.
5 [AUDIO] + ENTER.
5-1 [master volume] + ENTER.
Adjust the audio output level with  + ENTER.
5-2 [audio source] + ENTER.
Select an item with  + ENTER:
• [auto follow] = The audio follows the video image.
• [input --] = The selected audio input (is permanently diffused).
5-3 [audio level] + ENTER.
This function allows to separately adjust the level of each audio input. Adjust the level with  + ENTER.
NOTE: This function acts on the selected (diffused) audio input.
5-4 [audio balance] + ENTER.
This function allows adjusting for each input the audio balance. Adjust the level with  + ENTER.
NOTE: This function acts on the selected (diffused) audio input.
5-5 [mute off] + ENTER.
Switch ON or OFF the audio output. Validate with ENTER.