Manual erase function, Auto erase function – Panasonic WJ-HD500 Manuel d'utilisation
Page 88
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
■ Manual Erase Function
1. Repeat the procedures until the ERASE menu is dis
played on the monitor screen for auto erase.
'---------------------------------------------------
9-3-2 ERASE
------------------- '
AUTO ERASE OIT.
ERASE DATA BEFORE SEF12.00
ARE YOU SURE TO EXECUTE?
[SET!lEXECUTE YES HO
-
2. Move the cursor to the ERASE DATA BEFORE parame
ter in the menu by pressing the
A
or
T
button.
3. Select the month by pressing the 0 or 0 button, then
press the ► button to select the date and year by
repeating the procedure.
4. Move the cursor to the EXECUTE parameter by press
ing the
A
or ▼ button.
Select “YES" by pressing the or ► button, then press
the
SET
button to execute erase.
5, When the erase is completed, “DONE!" appears on the
lower-center in the menu.
'----------------------------------------
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO
[ESC]¡STOP
EXECUTE?
,YES HO
DONE!
k______________________
___________ -
6. Press the
SETUP/ESC
button for two seconds or more
to close the menu and return to the normal screen.
*
----------
9-3-2
ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[BSC]:STOP
HOW BRASINO
YES NO
The recorded data before the specified date will be
erased from the disk.
89