Panasonic WJ-HD500 - Manuel (Page 32)

0 Warning Display
Displays the status in case of Disk Recorder trouble.
THERMAL Indicates that the Disk Recorder or the
extension units occur thermal error,
indicates the extension unit number)
HDD Is displayed when the remaining space of
the Hard Disk reaches a specified value,
indicates the remaining capacity.)
OVERWRITE: Indicates that data are being overwritten
during a recording.
DISK FULL: Is displayed when the remaining space of
the Hard Disk reaches 0 %.
DVD Indicates the remaining space of the DVD-
RAM Disk, indicates the remaining capacity.)
ALTERED: Is displayed when the recorded data are
altered.
ERROR : Indicates access error of the Hard Disk.
{Hi-* indicates the Hard Disk number in the Disk
Information menu)
ERROR: Indicates that the other errors have occurred.
(D
System Status Display
Displays the system status of the Disk Recorder.
►: Indicates that data are being played back.
► X*: Indicates that data are being played back with
the search function,
(* indicates the search speed value)
II: Indicates that the playback is being paused.
N/W ►: Indicates that data are being transmitted to a
network.
COPYING: Indicates that data are being copied.
LOCKED: Indicates that the buttons are locked.
BUSY: Indicates that the line is busy.
® Group Display
Displays the selected group (G1. G2, G3, G4),
When all groups are selected, the display is disabled.
® Electronic Zoom Display
Displays to indicate that the zooming mode is selected.
ZOOM X*: Indicates that the electronic zoom mode is
selected (* indicates a value)
® Group Title Display
Displays the group title edited in the setup menu.
® Camera Title Display
Displays the camera title edited in the setup menu.
It can also enable the alarm display set in the setup
menu when an alarm is activated.
ALARM: Receives an alarm from the AU\RM port.
VMD: Detects a motion on the image
CH**LOSS: Detects a video signal loss has occurred.
32