Panasonic WJ-HD500 - Manuel (Page 29)

5. Select the ALL password (5-digit) by pressing the
Numeric buttons (1 - 1 0 ) .
Refer to the password setup in the SYSTEM SETUP
menu for further details.
The factory default setting is 12345.
• To select "0" for numeric input, press the numeric 10
button.
• Entering an input will automatically check the pass­
word.
If the password is not correct, "PASSWORD
ERROR!" is displayed on the monitor screen and
the display returns to step 3.
To enter the password again, repeat procedures 4
and 5.
• To quit entering the password, press the SETUP/
ESC button.
6. If the password is correct, the instructions shown below
appear in the lower-left corner of the menu.
To deactivate the mirror function:
• Select "MIRROR RELEASE” in the nienu by pressing
the M , ►, A or ▼ button, then press the SET button
during the step 7 procedure.
When the mirror function is activated, the "MIRROR
RELEASE" is displayed in the menu as shown below.
• All procedures are similar to setting the mirror function.
FORMAT MEND(MIRRORING)
HAIM 1!□□OB 2!□□GB
EXT5 1:□□OB 2;□□GB 3; □□OB 4;D^GB
EXT4 1!* 2!• 3 iADD 4 :ADD
EXT3 1;LOST 2;LOST 3iLOST 4:LOST
EXT2 1!LOST 21 LOST 3 ILOST 4 I LOST
EXTl 1:- 2 1 - 3:- 4i-
EXTO 1:- 2!-
EXT DVDiOK
3i- 4:-
IDISK ALL ALL MIRROR
RESTART
MIRROR RELEASE
SELECT ITEM AND PRESS [SET] KEY
FORMAT MEND
MAIN 1: d ^OB 2:0003
EXT5 1I□□OB 2:03GB 3 t□□GB 4;□□GB
EXT4 1:ADD 2: ADO 3:ADD 4: ADD
EXT3 1:- 2:- 3s- 4;-
EXT2 1:- 2:- 3s- 4:-
EXTl 1:- 2:- 3i- 4;-
EXTO li- 2:- 3:- 4;-
EXT DVD:-
IDISK ALL ALL MIRROR
RESTART
SELECT ITEM AND PRESS [SET] KEY
L
7. Move the cursor to "ALL MIRROR" on the table by
pressing the ►, A or ▼ button, then press the SET
button. The ALL MIRROR FORMAT menu will appear on
the monitor.
ALL MIRROR FORMAT
MAIN liDDOB 2 0DGB
EXT5 l:^DOB 2: dl OB 3)□□OB
■ ■■'■N
4 t □DOB
EZT4 1:• 2i* 3 ¡ADD 4 ADD
EZT3 1;L0ST 2¡LOST 31LOST 4 LOST
EXT2 1:LOST 2 tLOST 31L0ST 4 LOST
EXTl 1:- 2i- 3:- 4 .
EXTO 1i- 2t- 3t- 4 -
EXT DVD;OK
EXECUTE?
SELECT YES/NO
k_____________________
YES NO
AND PRESS [SET] KEY
8. Select "YES" in the menu by pressing the M or i
ton, then press the SET button to start formatting.
but-
9. When the formatting is completed, "FORMAT DONE!"
appears in the lower-center of the menu.
Normal camera images will appear on the monitor after
five seconds.
29