Controlling the video input and monitors, Controlling the spot monitor, T selecting the spot monitor – Panasonic WJ-HD500 Manuel d'utilisation
Page 71: Single sequence (live), I singie spot (live), The video input and monitors
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
CONTROLLING THE VIDEO INPUT AND MONITORS
■ Controlling the Spot Monitor
The operations descried below are available on the Spot
Monitor.
t Selecting the Spot Monitor
1. Select the Spot Monitor by pressing the SPOT/MULTI-
SCREEN button repeatedly.
The indicator in the button is on to indicate the Spot
monitor is selected.
• Single Sequence (Live)
A series of camera images can be displayed in succession
on the monitor screen for the specified duration.
Refer to the 5 - 1 - 3 SPOT LIVE SEQUENCE SETUP for fur
ther details.
1. Press the SEQUENCE button to run the assigned
sequence forward on the monitor screen.
The indicator in the button lights to indicate that the
sequence mode is selected.
i>SP0T
oMULTlSCRSN
2. In this condition, select the images to be displayed on
the monitor screen followed the procedure shown
below.
i Singie Spot (Live)
1. Select an image to be displayed on the monitor by
pressing a numeric button
(1 -16).
The indicator in the selected button lights up and the
camera image corresponding to the button appears on
the monitor screen.
2. To seiect another image, press a numeric button
(1 -
16) corresponding to the image.
The selected image appears on the monitor screen.
The indicator in the button previously selected turns off
and the indicator in the button currently selected lights
up.
The indicator in the numeric button lights up and the
camera image corresponding to the button appears on
the monitor screen.
During the sequence, press the SEQUENCE button to
pause the sequence that is being run on the monitor
screen.
The indicator in the button blinks to indicate the
sequence is paused.
SEQUiEf^CE
-FTT-^h
/ ! \
3. Press the SEQUENCE button to restart the sequence
forward from the step that was previously paused by
pressing the SEQUENCE button.
The indicator in the button changes to a steady light.
4. To return to Spot monitoring, select an image to be dis
played on the monitor by pressing a numeric button (1
-
16).
Note: You can also enable the Auto Skip function to
skip any steps where no video signal is present.
Refer to the AUTO SKIP in the 5 - 1 SEQUENCE
SETUP for further details.
72