Sequence timing setting, Auto skip setting, Power on setting (multiscreen monitor) – Panasonic WJ-HD500 Manuel d'utilisation

Page 54: Power on setting (spot monitor), Power on status setup

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

6. Repeat the above steps 2 to 5 to set up the other steps.

7, When satisfied with al! of the above steps, press the

SETUP/ESC

button

to

return to the previous

SEQUENCE SETUP menu.

• Sequence Timing Setting

This item lets you select between internal and external con­

trol for advancing the sequence on the Spot Monitor.

1. Move the cursor to the SEQ TIMING parameter in the

SEQUENCE SETUP menu by pressing the A or ▼ but­

ton.

2. Select either INT or EXT by pressing the Q or 0 but­

ton.

INT: Advances a sequence by the Dwell Time that was

programmed on the SPOT LIVE SEQUENCE
SETUP.

EXT: Advances a sequence by the input from pin 5 of

the ALARM port.

The factory default setting is INT,

• Auto Skip Setting

This item lets you enable or disable the auto skip function
on the Spot Monitor to skip any steps when no video signal

is present.

1. Move the cursor to the AUTO SKIP parameter in the

SEQUENCE SETUP by pressing the

A

or

T

button.

2. Select either ON or OFF by pressing the © or 0 but­

ton.

ON: Enables the auto skip function on the Spot Monitor.
OFF: Disables the auto skip function on the Spot

Monitor.

The factory default setting is ON.

Power on Status Setup

The items let you select a pattern on the monitor screen
when the Disk Recorder’s power is turned on.

■ Power on Setting (Multiscreen

Monitor)

This item lets you select a - display pattern on the

Multiscreen Monitor when the Disk Recorder's power is

turned on.

1. Move the cursor to the MULTI OUTPUT parameter in

the MULTIPLEXER SETUP menu by pressing the

A

or

T

button.

2. Select a display pattern to be set by pressing the © or

0 button.

1 - 16: Selects an assigned camera image in single

spot mode.

SPOT SEQ: Selects a sequence pattern programmed

in the Live Sequence (Spot Monitor).

QUAD-4A to QUAD-4D: Selects an assigned quad dis­

play in spot mode.

QUAD SEQ: Selects a sequence pattern programmed

in the Live Sequence (Multiscreen Monitor).

7 to 16SCREEN: Selects a display with the assigned

segment.

The factory default setting is QUAD-4A.

■ Power on Setting (Spot Monitor)

This item lets you select a display pattern on the Spot

Monitor when the Disk Recorder’s power is turned on.

1. Move the cursor to the SPOT OUTPUT parameter in the

MULTIPLEXER SETUP menu by pressing the

A

or ▼

button.

2. Select a display pattern to be set by pressing the © or

0 button.

1 - 16: Selects an assigned camera image in single

spot mode.

SPOT SEQ: Selects a sequence pattern programmed

in the Live Sequence (Spot Monitor).

The factory default setting is 1.

55

Advertising