Panasonic WJ-HD500 - Manuel (Page 47)

2. Move the cursor to the TIMER REC MODE parameter in
the menu by pressing the A or ▼ button.
3. Select the recording time mode to be set by pressing
the E) or Q button.
SF-*HsH or SF-A**H:H: Selects the recording time
mode in enhanced fine quality,
FQ-H:^H or FQ-A*H«HtH: Selects the recording time
mode in fine quality.
NQ-**H or NQ-A*^*H: Selects the recording time
mode in normal quality.
EX-HiHiH or EX-A*^*H: Selects the recording time
mode in extended quality.
SP or SP-A*: Freely selectable
indicates the hours for recording time mode:
2, 12, 18, 24, 48, 72, 96. 120, 180, 240, 360, 480,
720, 960, 1200, 1440, 2160, 2880, 3600, 4320,
6480, 8640
(parameter A* indicates recording with audio)
When the parameter SF/FQ/NQ/EX is selected for
recording time, the recording rate and quality are auto­
matically set according to the selected recording time.
Note: It may not be possible to set the recording time,
depending on the remaining storage capacity of the
hard disk.
The factory default setting is SF-24H.
4. If the parameter SP is selected for recording time, move
the cursor to the REC RATE parameter by pressing the
A or T button, then select a recording rate by pressing
the 0 or (3 button.
1 - 30FPS: Records the selected number of freeze
images every second.
0.5FPS: Records a freeze image every 2 seconds.
0.4FPS: Records a freeze image every 2.5 seconds.
0.3FPS: Records a freeze image every 3.3 seconds.
0.2FPS: Records a freeze image every 5 seconds.
0.1 FPS: Records a freeze image every 10 seconds.
• 30FPS is the active selection when the FIELD/FRAME
parameter in the COMMON REC SETUP menu is set to
FIELD .
• 15FPS is the active selection when the FIELD/FRAME
parameter in the COMMON,REC SETUP menu is set.to
FIELD or FRAME 3DIM OFF.
Move the cursor to the REC QUALITY parameter by
pressing the
A or T button, then select a recording
image quality by pressing the 0 or 0 button.
SUPER FINE: For enhanced sharpness (Compression
Rate 1/6)
FINE: For fine image quality (Compression Rate 1/10)
NORMAL: For normal image quality (Compression Rate
1/16)
EXTENDED: For extended time recording quality
(Compression Rate 1/25)
• Alarm Recording
These items let you set the recording mode in Time Lapse
Recording when an alarm is activated during the recording
with the internal programmed timer.
1. Move the cursor to the ALARM REC MODE parameter
by pressing the A or T button, then select a recording
time mode by pressing the 0 or 0 button.
The parameters are the same as TIMER REC MODE.
For details refer to TIMER REC MODE in this menu.
2. Move the cursor to the REC RATE parameter by press­
ing the A or T button, then select a recording rate by
pressing the 0 or 0 button.
For details refer to REC RATE in this menu.
3. Move the cursor to the REC QUALITY parameter by
pressing the A or T button, then select a recording
image quality by pressing the 0 or 0 button.
For details refer to REC QUALITY in this menu.
4. Move the cursor to the DURATION parameter by press­
ing the A or ▼ button, then select the alarm recording
duration by pressing the 0 or 0 button.
10S - 6M: Enables alarm recording for between 10 sec­
onds and 6 minutes.
MANUAL: Enables alarm recording while the alarm sig­
nal is received from the ALARM port.
CONTINUE: Enables alarm recording until the REC
STOP is pressed.
The factory default setting is 10S.
5. Move the cursor to the DYNAMIC REC parameter by
pressing the A or T button, then select an alarm
recording pattern by pressing the 0 or 0 button.
OFF: Records the images assigned to the group inputs
including the one which has activated the alarm.
ALM-PRI: Records the alarm input images preferential­
ly over other video inputs.
ALM-ONLY: Records the particular images that have
activated the alarm.
The factory default setting is OFF.
6. Press the SETUP/ESC button to return to the previous
program number menu.
48