Panasonic WJ-HD500 - Manuel (Page 34)

■ Time Lapse Recording
The Time Lapse Recording records freeze images at regular intervals until the end of the recording operation.
• Manual and External (Power-on) Timer Recording is recorded in this mode on the Manual Recorder. Refer to the Manual
Recording Setup for further details.
• Emergency Recording is also recorded in this mode on the Emergency Recorder. Refer to the Emergency Recording
Setup for further details.
• This recording mode is also available as Internal Timer Recording with the assigned program timer. Refer to the assigned
program timer for further details.
The Time Lapse Recording mode records images as shown below.
^ Start__________________________________________ ^____________ _
Cl C2 C3 C4 C5 C6 C7 C8
-Thumbnail
Notes:
• The thumbnail is based on an image as soon as the recorder starts recording.
• The recording number is automatically assigned and renewed after 5 000 images.
The thumbnail is also made with an image at that time.
■ Multi Shot Recording
The Multi Shot Recording is an event-recording function reacting to an alarm input when the recording timer is set to the inter­
nal timer [INT].
It records the number of images in pre- and post-recording.
Pre-recording is the recorded images during standby, prior to the input of an alarm signal.
Post-recording is the recorded images after the input of the alarm signal.
The Multi Shot Recording mode is a setting that can be assigned with the program timer.
The Multi Shot Recording mode records images on the Timer Recorder, corresponding to the alarm input signal, as shown
below.
For example, camera inputs 1 , 2 , 3 and 4 are assigned to a group.
• Dynamic Recording is set to OFF
Records the assigned camera input in a specified number of pre- and post-recording when an alarm is received.
Alarm 2 Alarm 4
Cl C2 C3 C4 Cl C2 C3 C4 Cl C2 C3 C4 Cl C2 C3 C4
T Thumbnail T Thumbnail
Pre-recording Post-recording Pre-recording Post-recording
34