Formahing the hard disk, Notes, Formatting the hard disk – Panasonic WJ-HD500 Manuel d'utilisation
Page 25
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

FORMAHING THE HARD DISK
The Hard Disk requires formatting before it can be used for
storing images, as shown below.
• When the Hard Disk in the Disk Recorder is replaced.
(Disk formatting is required for the replaced Hard Disk.)
• When the optional extension units are operated for the
first time after installation.
(Disk formatting is required for the Hard Disk in the
Extension Unit.)
Notes:
•
Remember that by formatting the hard disk all previ
ously recorded data on the disk will be erased.
•
If the Disk Recorder is set up with the mirroring
function, the replaced Hard Disk is automatically
copying the data from the other disk of the pair after
the disk was formatted.
Copying data will take about two hours for a disk
with a capacity of 30 GB.
Follow the procedures described below to format the Hard
Disk in the unit.
1. Power up the Disk Recorder by pressing the POWER
switch.
2. The Disk Recorder will run through a series of instruc
tions for the system on the Multiscreen Monitor.
The display as shown below appears on the monitor,
then the DISK MENU shown below will be displayed
after five seconds.
3. Move the cursor to FORMAT in the menu by pressing
the or ► button, then press the SET button.
The FORMAT MENU shown below appears on the mon
itor screen.
FORMAT HENO
MAIN 1:0:)GB
2:3:iGB
EXT5 1:D3GB
2:DDGB
3!DDCB
4:a^GB
SXT4 liADD
2 ¡ADD
3:ADD
4; ADD
EXT3 1!-
2:-
3:-
4i-
EXT2 1!-
2:-
3;-
4;-
EXTl 1!-
2:-
3
4 1 -
EXTO 1:-
EXT DVDj-
2:-
3i-
4:-
PASSWORDS-
-
Select the ALL password (5-digit) by pressing the
Numeric buttons (1-10).
Refer to the password setup in the SYSTEM SETUP
menu for further details.
The factory default setting is 12345.
• To select "0" for numeric input, press the numeric 10
button.
• Entering an input will automatically check the pass
word.
If the password is not correct, "PASSWORD
ERROR!" is displayed on the monitor screen and
the display returns to step 2.
To enter the password again, repeat procedures 3
and 4,
• To quit entering the password, press the SETUP/
ESC button.
'-----
t SYSTEM CHECK ]
---
'
YOD HAVE TO CONFIGURE DISKS
PLEASE WAIT
.
_
5. If the password is correct, the instructions shown below
appear in the lower-left corner of the menu.
'
DISK MENU
MAIN 1:DDGB
2 I□DQB
EXT5 1i CDOB
2:DDQB
3:DDQB
4;DDGB
EXT4 liADD
2iADD
3 tADD
4 ¡ADD
EXT3 li-
2i-
3:-
4:-
EXT2 1T-
2;-
3s-
4:-
EXTl 1;-
2 t -
3s-
4:-
EXTO 1:-
2:-
3:-
4:-
EXT DVD*-
REMOVE FORMAT
RESTART
SELECT ITEM AND PRESS
[SET]
KEY
__________ -
FORMAT MENU
MAIN
liDDGB
2¡□□GB
EXT5
liDJGB
2!□□GB
SiQDQB
4:□□OB
EXT4
liADD
2 ¡ADD
3:ADD
4;ADD
EXT3
li-
2i-
3i-
4:-
EXT2
li-
2i-
3i-
4 1 -
EXTl
li-
2i-
3i-
4:-
EXTO
li-
2i-
3i-
4i-
EXT DVD:-
IDISK
ALL
ALL MIRROR
RESTART
SELECT ITEM
AMD PRESS
[SET]
KEY
-
25