Recording of the title display, Recording of the clock display, Playback mode setup – Panasonic WJ-HD500 Manuel d'utilisation
Page 42: Hard disk end setup, Thumbnail display setup
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
■ Recording of the Title Display
This item lets you enable or disable recording of the cam
era and group titles with the image on the Hard Disk.
1. Move the cursor to the TITLE EMBEDDED parameter in
the COMMON REC SETUP menu by pressing the A or
▼ button.
2. Select either ON or OFF by pressing the 0 or Q but
ton.
ON: Enables recording of the titles on the Hard Disk.
OFF: Disables recording of the titles on the Hard Disk.
The factory default setting is OFF.
■ Recording of the Clock Display
This item lets you enable or disable recording of the clock
(date and time) with the image on the Hard Disk.
Playback Mode Setup
This item lets you select the playback mode according to
the recorded number when the PLAYBACK button is
pressed.
1. Move the cursor to the PLAYBACK MODE parameter in
the COMMON REC SETUP menu by pressing the
A
or
▼ button,
2. Select the desired mode to be played back by pressing
the
El
or
0
button.
ALL: All the records are played back with automatic
switching.
LOOP: Repeats playing back the selected number of
the recording.
ONE: Switches to standby mode for the next operation,
after the selected recording number has been
played back once.
The factory default setting is ALL.
1. Move the cursor to the TIME EMBEDDED parameter in
the COMMON REC SETUP menu by pressing the
A
or
▼ button,
2. Select either ON or OFF by pressing the 0 or Q but
ton.
ON: Enables recording of the clock on the Hard Disk,
OFF: Disables recording of the clock on the Hard Disk.
■ Hard Disk End Setup
This item lets you enable or disable uninterrupted recording
when the hard disk space is used up.
1. Move the cursor to the HDD DISKEND parameter in the
COMMON REC SETUP menu by pressing the
A
or
T
button.
The factory default setting is OFF.
2. Select the desired mode by pressing the 0 or 0 but
ton.
■ Thumbnail Display Setup
This item lets you select the maximum number of thumbnail
images displayed in the search window.
1. Move the cursor to the THUMBNAIL parameter in the
COMMON REC SETUP menu by pressing the
A
or
T
button.
STOP: Stops recording when the disk is full.
CONTINUE: Continues recording by overwriting the
oldest data when the disk is full.
ALM CONTINUE: Continues only recording the data
while an alarm is activated by overwriting the oldest
data, when the disk is full.
The factory default setting is STOP.
2. Select either 8 or 16 by pressing the 0 or 0 button.
8
:
Displays a maximum of 8 thumbnail images.
16: Displays a maximum of 16 thumbnail images.
The factory default setting is 8.
43