Group setup, Camera assignment, Group title setup – Panasonic WJ-HD500 Manuel d'utilisation
Page 41
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Group Setup
As described before, the Disk Recorder activates the
recording function of the assigned cameras in four groups
when the TIMER is set to INT (internal).
These items let you determine the camera's group for
recording.
• Camera Assignment
1. Move the cursor to CAMERA ASSIGNMENT in the
COMMON REC SETUP menu by pressing the
A
or
T
buttons, then press the SET button.
The GROUP SETUP [CAMERA ASSIGNMENT) menu as
shown below appears on the monitor screen.
1-1 OROnF SETUPfCAMERA ASSZGNHEDT}
СЛН GROUP
СЛИ GROUP
1
1
9
1
2
1
10
1
3
1
11
1
4
1
12
1
5
1
13
1
6
1
14
1
7
1
IS
1
8
1
16
1
2. Move the cursor to the group editing area for the cam
eras by pressing the ►,
A
or ▼ buttons.
3. Select a group number
(1
to
4)
to be assigned by
pressing the (+) or 0 button.
The factory default setting is 1.
4. Repeat the above step 2 and 3 to assign the group
number for other cameras.
5. When all camera assignments are completed, press the
SETUP/ESC button to return to the previous COMMON
REC SETUP menu.
• Group Title Setup
This item lets you edit the group title to be displayed on the
monitor screen.
Each title is composed of 8 alphanumeric characters.
1. Move the cursor to TITLE in the COMMON REC SETUP
menu by pressing the
A
or
T
button, then press the
SET button.
The GROUP SETUP (TITLE) menu as shown below
appears on the monitor screen.
2. Move the cursor to the group editing area to be edited
by pressing the
A
or ? button.
3. Select a character by pressing the 0 or 0 button.
The characters shown below can be selected
sequence.
in
Numeral: 0 1 2 3 4 5 6 7 8 9
Alphabet: A t o Z , a t o z
-Symbols: <--- > = ? ’ " # $ % & ( )
Space: •
4. Press the ► button to move the cursor to the right, then
select a character by pressing the 0 or 0 button.
5. Repeat the above steps 3 and 4 until all characters are
completed for the selected group title.
If a wrong character is selected, move the cursor to the
character to be replaced by pressing the or ► but
ton, then select a new character by pressing the 0 or
0 button.
6. Repeat the above steps 2 to 5 to edit other group titles.
7. When satisfied with all the group titles, press the
SETUP/ESC button to return to the previous COMMON
REC SETUP menu.
42