Panasonic WJ-HD500 - Manuel (Page 46)

■ Special Day Timer
Before programming this table, confirm that the Program
Timer is programmed completely.
This table allows for up to 30 days to be defined as special
days.
In this table, 30 specific user defined days are assigned to
one day of the week.
External Program Timer
The internal timer can be changed to the specified timer
previously programmed by the input from the external
timer. This function is enabled, when a contact is connect­
ed with pin 22 of the ALARM port.
This item lets you enable or disable the external timer for
recording.
1. Move the cursor to TIMER SPECIAL DAY in the TIMER
REC SETUP menu by pressing the A or ▼ button, then
press the SET button.
The TIMER SPECIAL DAY SETUP table as shown below
appears on the monitor screen.
1. Move the cursor to the EXT REC MODE parameter in
the TIMER REC SETUP menu by pressing the A or T
button.
2. Select the desired program to be changed by pressing
the 0 or □ button.
----------------------------------- ■
3- S TIMER SPECIAL DAY SETUP
DATE ACT DATE ACT DATE ACT
1 JUL04 SOW 11 ------------------ ----- 21------------------------
2 --------- -------- 12---------------- ----- 22--------------- --------
3 --------- -------- 13---------------- ----- 23--------------- --------
4 --------- -------- 14---------------- ----- 24--------------- --------
5 --------- -------- 15---------------- --- 25..............................
6 --------- -------- 16---------------- --- 26 -------------------------
7 --------- -------- 17---------------- ----- 27--------------- --------
S --------- -------- IS---------------- ----- 28--------------- --------
9 --------- -------- 19---------------- ----- 29.................................
10 --------- -------- 20...................... ----- 30--------------- --------
-
PROG1 - 4: Selects a timer assigned program number.
—: Disables the external program timer.
The factory default setting is —.
3. Press the SET button to display the assigned program
number menu previously programmed.
If the program number menu has not been edited previ­
ously, edit the assigned program number menu as
described before.
2. Move the cursor to the DATE editing area by pressing
the A or ▼ button.
4. Press the SETUP/ESC button to return to the previous
setup menu.
3. Select a month by pressing the 0 or Q button.
Move the cursor to the right by pressing the ► button,
then select the date by pressing the 0 or 0 button.
Note; The programmed month and date will be valid for
every year.
■ Time Lapse Recording (Internal
Timer)
These items let you set the recording parameters for Time
Lapse Recording assigned in the program number menu.
4. Move the cursor to the ACT editing area by pressing
the ► button, then select the day of the week by press­
ing the 0 or 0 button.
5. Repeat the above steps 2 to 4 to program the other
special days.
6. When satisfied with all special days, press the
SETUP/ESC button to return to the previous TIMER
REC SETUP menu.
Note: To release the programmed special day timer, select
" in the ACT column.
(Continued from Program Timer)
1. Select the recording mode T/L in the program number
menu by pressing the 0 or 0 button, then press the
SET button.
The selected Time Lapse Recording menu shown
below appears on the monitor screen.
3-1-1-1 PROGl-NOl-01 REC SETUP
T/L(TIHE LAPSE)
TIMER REC MODE SF- 24H
REC RATE 7.5FPS
REC QUALITY SUPER FINE
ALARM REC MODE SF- 24H
REC RATE 7.5FPS
REC QUALITY SUPER FINE
DURATION lOS
DYNAMIC REC OFF
■
47