Ohaus I10 Indicator - Manuel (Page 56)

56
7 7 7 7 7 RS232 Interface
RS232 COMMAND TABLE RS232 COMMAND TABLE RS232 COMMAND TABLE RS232 COMMAND TABLE RS232 COMMAND TABLE
Command Command Command Command Command
Character Character Character Character Character Description Description Description Description Description
? ? ? ? ? Print current mode
and stability status
T Same effect as pressing TARE button
M Same effect as pressing UNITS button
P Print display data
Z Rezeroes the I 10
N Same effect as pressing GROSS/NET button
#G Go To Mode “#” where “#” = 0, 1, 2 or 3 as follows:
0 = lb, 1 = kg, 2 = custom unit, 3 = parts counting
W or Send Gross Weight: The I 10 will automacitcally switch to GROSS weight
SGW reading, then ouput display data.
#A Set Averaging Level to “#”: # Value # Value # Value # Value # Value
0 200 milliseconds w/no filtering
1 200 milliseconds with filtering
2 400 milliseconds with filtering
3 800 milliseconds with filtering
##D Set Address to “##” where “##” is from 01 to 99. 00 disables the feature.
00 to 99
Blank if stable
“ ? ” if unstable
N = Net
G = Gross
lb, kg, C or PC
Field: Mode Net Stab Adr CR LF
Length: 3 1 1 1 2 1 1
Field: Pol Weight Mode Net Stab Adr CR LF
Length: 1 7 1 3 1 1 1 2 1 1
blank if positive
“-” if negative Same as “?”
command Displayed weight sent
right justified w/lead
zero blanking.