Ohaus I10 Indicator - Manuel (Page 28)

28
Graduations Graduations Graduations Graduations Graduations
This parameter specifies the increments
in which the last digit(s) of the display will
count. Graduations can be set to 1, 2, 5,
10, 20 or 50. The decimal point position
set in the “dP” parameter will affect this
setting.
For example:
Setting graduations to 2 with a deci-
mal point position of 0000.0 will
cause the
I 10 to count by 0000.2.
Setting graduations to 2 with a deci-
mal point position of 00000 (no deci-
mal places) will cause the
I 10 to
count by 2.
To set graduations:
1. Access the “grAd” parameter if it is
not already displayed.
2. Press until the desired set-
ting is displayed.
To accept the displayed setting and pro-
ceed to the next parameter (Full Scale
Point), press .
To exit the Program Constants menu
and store your settings, repeatedly press
until SEtUP is displayed, then
press again to return to the weigh-
ing mode.
1 display counts by 1's
2 display counts by 2's
5 display counts by 5's
10 display counts by 10's
20 display counts by 20's
50 display counts by 50's
3 3 3 3 3 Setting Program Constants