Epson 3000 - Manuel (Page 73)

Making the Media Type Setting
There are actually two Media Type settings; the setting in your
printer driver and the setting on your printer’s control panel.
You need to make the Media Type setting in your driver every
time, even if you select Automatic as the Mode setting. You do
not have to make the Media Type setting on your printer’s
control panel, but it is recommended.
The printer’s Media Type setting acts as a warning or reminder
for when you or someone else selects the wrong Media Type in
the software. To make the printer’s Media Type setting, push
the Media Type button repeatedly until the lights on the
control panel indicate the type of media loaded in the printer.
To disable this, select Other/Media Selection Off.
To make the Media Type setting in your software, access the
printer software as described on page 3-4 and click the Main
tab if necessary; then see the following to determine the Media
Type setting (shown in bold) for your paper. First find your
paper in the list below, then select the corresponding Media
Type setting in your software.
Note:
If the corresponding Media Type option for your paper is not shown
in the Media Type list, change the Print Quality setting in the More
Settings dialog box, select Automatic as the Mode setting, or change
the predefined setting in the Advanced settings list on the Main menu.
Plain Paper
Plain paper
Envelopes
Wi
n
d
ow
s
3
R
Loire-P Ref. Guide
Rev.c
A5 size Chapter 3
02-24-97 DR, pass 0
Printing With Windows 3-13