Epson 3000 - Manuel (Page 44)

5. Click the Add Port button, then specify the network path to
the printer. Click OK.
Note:
If you want to print from DOS applications as well as from
Windows applications, click the Capture Printer Port button
instead of the Add Port button. Click anywhere in the Device
box and select the printer port your printer is connected to, then
specify the network path to the printer. Make sure Reconnect
at logon is selected, then click OK.
6. After you have made your settings on the Details menu, click
Start , point to Programs and Epson, then click Spool
Manager4 . The Spool Manager window opens.
7. Select your printer, click the Queue menu, then click Setup.
The Queue setup window opens.
8. Make sure the Use Print Manager for this port option is on;
it is on if the check box contains a check. Then click OK.
Now you can use your printer on a network.
For Windows 3.1
Follow these steps to install the software using Windows 3.1:
1. Make sure Windows 3.1 is running and the Program Manager
window is open.
2. Insert the Printer Software CD shipped with your printer in
the CD-ROM drive. (If you use the floppy disk version,
insert it in a floppy disk drive.)
L
Loire-P Ref. Guide
Rev.c
A5 size Chapter 2
02-24-97 DR, pass 0
2-18 Getting Started