Epson 3000 - Manuel (Page 13)

❑ Once you install an ink cartridge, do not open the clamp or
remove the cartridge except to replace it with a new one.
The cartridge may become unusable otherwise.
❑ Install the ink cartridge immediately after you remove it
from its package. Leaving the cartridge unpacked for a long
time before use may result in reduced print quality.
❑ Do not use an ink cartridge beyond the date printed on the
cartridge carton. For best results, use up the ink cartridges
within six months of installing them.
❑ Always turn the printer off using the
2
Operate button. The
Pause light flashes until the print heads are capped, which
means they are in the home (far right) position. Do not
unplug the printer or turn off the power to the outlet until
the Pause light stops flashing and the
2
Operate light is off.
❑ Before transporting the printer, make sure the print heads
are capped in the home position and the ink cartridges are
in place.
E NERGY S TAR Compliance
As an E NERGY S TAR Partner, EPSON has
determined that this product meets the E NERGY
S TAR guidelines for energy efficiency.
The International E NERGY S TAR Office Equipment Program
is a voluntary partnership with the computer and office
equipment industry to promote the introduction of
energy-efficient personal computers, monitors, printers, fax
machines, and copiers in an effort to reduce air pollution
caused by power generation.
energy
R
Loire-P Ref. Guide
Rev.c
A5 size Introduction
02-24-97 DR, pass 0
Safety Instructions 3