Epson 3000 - Manuel (Page 147)

EPSON banner paper
Loading banner paper
If you print on EPSON 360 dpi Ink Jet Banner Paper, EPSON
Photo Quality Banner Paper, or EPSON Ink Jet Canvas Cloth,
EPSON recommends you to use the optional Banner Paper
Cutter, especially for EPSON Ink Jet Canvas Cloth. See your
dealer for information about the Banner Paper Cutter.
1. Hold down the Media Type
,
button and turn on the printer
to enter the default-setting mode. The printer prints a brief
summary and instruction sheet.
2. Follow the instructions on the printed sheet, and print the
current default settings. Using the default settings and
printed instructions as guides, make sure that both the
Banner mode and the Auto tear-off setting are on. See
“Using the Default-Setting Mode” on page 6-4 for details.
3. When finished, turn off the printer and turn it back on again.
Make sure that the paper-release lever is set to the single
sheet position.
c
Caution:
Do not insert paper before you turn on the printer.
a-701
5
R
Loire-p Ref. Guide
Rev.c
A5 size Chapter 5
02-24-97 DR, pass 0
Paper Handling 5-31