Epson 3000 - Manuel (Page 49)

3. Connect the other end of the interface cable to either the
modem port or printer port on the Macintosh. (Some
Macintosh Power Book models have only one serial port.)
The ports are marked with the following icons.
Note:
If your Macintosh has a built-in modem, connect the interface
cable to the printer port.
4. Turn on the printer by pressing the
2
Operate button.
5. Turn on your Macintosh.
See “Installing the Printer Software in Your Macintosh” on the
next page for instructions on installing the printer software.
You must install the printer software before using your printer.
Using an optional EPSON interface card
An optional LocalTalk

or Ethernet interface card lets you use
your printer on an AppleTalk network.
To use the LocalTalk Interface Card (C82312✽), you will need
two LocalTalk Locking Connector Kits (DIN-8 version). Attach
a connector box to the AppleTalk interface on the printer and to
the printer port on the Macintosh. Then attach the LocalTalk
cable between the two connector boxes. See the user’s guide
that comes with the connector kits for more details.
To use the Ethernet Interface Card (C82331✽), see the user’s
guide that comes with the card for setup information.
modem port printer port
em-17.18
2
R
Loire-P Ref. Guide
Rev.c
A5 size Chapter 2
02-24-97 DR, pass 0
Getting Started 2-23